Control Valve (Auxiliary)
Show/hide table
| |
| Illustration 1 | g06052764 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 8 | 8T-4195 Bolt | Torque to |
| 2 | 2 | 352-7122 Relief Valve Gp | Torque to |
| 3 | 2 | 095-1590 O-Ring Seal | Lubricate the bore of the O-ring seals lightly with the lubricant that is being sealed. |
| 4 | 2 | 095-1787 Backup Ring | Lubricate the bore of the backup rings lightly with the lubricant that is being sealed. |
| 5 | 2 | 7I-1248 Spring | Length under test force is Test force is Free length after test is |
| 6 | 2 | 352-7057 Spring | Length under test force is Test force is Free length after test is |
| 7 | 2 | 153-5276 Special Bolt | Before assembly, apply red Loctite 263 to the threads of the special bolt.
Torque to |
| 8 | 2 | Stem | Torque to |
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
C6.6 Generator Sets Refill Capacities
XQ175 Rental Generator Set Belts - Inspect/Adjust/Replace
793F and 793F CMD Off-Highway Truck Power Train Air Inlet System - Test and Inspect
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
C3.4B Industrial Engine Model View Illustrations
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
XQ175 Rental Generator Set Product Description
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
C3.4B Industrial Engine Electrical System
C280 Marine Propulsion Engines Injector Code - Calibrate
C4.4 Industrial Engine Clean Emissions Module
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Troubleshooting
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electric Starting System - Test
XQ175 Rental Generator Set Voltage Regulators - R450 Automatic Voltage Regulator (AVR) (If Equipped)
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
CX28 On-Highway Transmission Specifications
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C13 Industrial Engines Idler Pulley
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Engine Oil Pump