Belts - Inspect/Adjust/Replace
Show/hide table
NOTICE |
---|
Ensure that the engine is stopped before any servicing or repair is performed. |
To maximize the engine performance, inspect the belt (1) for wear and for cracking. Replace the belt if the belt is worn or damaged.
- If the belt (1) has more than four cracks per
25.4000 mm (1 inch) , the belt must be replaced. - Check the belt for the following items: cracks, splits, glazing, grease, splitting and broken ribs
- Remove any deposits that are on the belt.
Show/hide table
Illustration 1 | g01347573 |
Typical example |
Caterpillar Information System:
793F and 793F CMD Off-Highway Truck Power Train Air Inlet System - Test and Inspect
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
C3.4B Industrial Engine Model View Illustrations
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
XQ175 Rental Generator Set Product Description
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
C3.4B Industrial Engine Electrical System
C3.4B Industrial Engine High Pressure Fuel Lines
349F and 352F Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
G3520E Generator Set Engines Event Codes
C6.6 Generator Sets Refill Capacities
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
C280 Marine Propulsion Engines Injector Code - Calibrate
C4.4 Industrial Engine Clean Emissions Module
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Troubleshooting
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electric Starting System - Test
XQ175 Rental Generator Set Voltage Regulators - R450 Automatic Voltage Regulator (AVR) (If Equipped)
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
CX28 On-Highway Transmission Specifications
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install