Model View Illustrations
The following model views show typical features of the engine. Due to individual applications, your engine may appear different from the illustrations.
Show/hide table
| |
| Illustration 1 | g03367500 |
|
Typical example (1) Engine aftertreatment system (2) NOx control valve (3) Air outlet connection from turbocharger (4) Alternator (5) Air intake from air filter (6) Coolant intake connection (7) Turbocharger (8) Solenoid for stating motor (9) Starting motor (10) Oil drain plug (11) Flywheel housing (12) Flywheel | |
Show/hide table
| |
| Illustration 2 | g03367502 |
|
Typical example (13) Secondary fuel filter (14) Oil filter (15) Oil level gauge (Dipstick) (16) High-pressure fuel pump (17) Valve mechanism cover | |
Show/hide table
| |
| Illustration 3 | g03367547 |
|
(18) Rear lifting eyes
(19) Front lifting eye (20) Crankcase breather (21) Oil filler cap (22) Belt (23) Coolant pump (24) Coolant outlet connection (25) Air inlet connection | |
The oil filler cap (21) can also be located on the valve mechanism cover.
Show/hide table
| |
| Illustration 4 | g06082900 |
|
(26) Fuel priming pump
(27) Primary fuel filter (28) Differential pressure sensor (29) Electronic control module (30) Relay for glow plugs (31) Breather heater | |
Engine View with Wall Flow Diesel Particulate Filter
Show/hide table
| |
| Illustration 5 | g03367096 |
|
Typical example | |
The wall flow Diesel Particulate Filter (DPF) will require a service, refer to this Operation and Maintenance Manual, "Maintenance Interval Schedule" for the service period.
Show/hide table
| |
| Illustration 6 | g06082892 |
|
Typical example | |
The wall flow Diesel Particulate Filter (DPF) will require a service, refer to this Operation and Maintenance Manual, "Maintenance Interval Schedule" for the service period.
Engine View with Through Flow Diesel Particulate Filter
Show/hide table
| |
| Illustration 7 | g03367094 |
|
Typical example | |
The through-flow type of DPF will not require a service interval.
Caterpillar Information System:
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
XQ175 Rental Generator Set Product Description
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
C3.4B Industrial Engine Electrical System
C3.4B Industrial Engine High Pressure Fuel Lines
349F and 352F Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
G3520E Generator Set Engines Event Codes
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Petroleum Generator Sets Severe Service Application
G3520E Generator Set Engines Integrated Temperature Sensing Module - Test
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
793F and 793F CMD Off-Highway Truck Power Train Air Inlet System - Test and Inspect
XQ175 Rental Generator Set Belts - Inspect/Adjust/Replace
C6.6 Generator Sets Refill Capacities
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
C280 Marine Propulsion Engines Injector Code - Calibrate
C4.4 Industrial Engine Clean Emissions Module
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Troubleshooting
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electric Starting System - Test
XQ175 Rental Generator Set Voltage Regulators - R450 Automatic Voltage Regulator (AVR) (If Equipped)