New Locknuts for the Exhaust Manifold Are Available for Certain Truck Engines {1059}
- Engine:
- C-15 (S/N: 6NZ1-UP; 9NZ1-UP)
- C-16 (S/N: 7CZ1-UP)
- C-18 (S/N: MDP1-UP)
- C15 (S/N: SDP1-UP; B5R1-UP; BXS1-UP; MXS1-UP; NXS1-UP)
The new 2N-2766 Locknuts replace the existing locknuts whenever the existing locknuts are removed.
Torque the new locknuts to ... 50 N·m (37 lb ft)
Caterpillar Information System:
C27 and C32 Industrial Engines Camshaft Position Sensor - Remove and Install
2010/08/26 An Improved Locknut Is Now Used to Tighten the Exhaust Manifolds onto the Cylinder Heads of Certain Engines {1059, 7553}
2010/08/26 An Improved Locknut Is Now Used to Tighten the Exhaust Manifolds onto the Cylinder Heads of Certain C15 Engines and C-15 Engines {1059, 7553}
C27 and C32 Industrial Engines Atmospheric Pressure Sensor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Speed/Timing - Test
C18 Marine Generator Set Electronic Modular Control Panel 3 (EMCP 3) - If Equipped
3512C HD Locomotive Engine Monitoring System
C27 and C32 Engines for Caterpillar Built Machines Cooling System
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - Single Oil Pan
3412C Generator Sets Generator Lead (Round Cable) - Check - If Equipped
3512C HD Locomotive Engine System Pressure Release
3512C HD Locomotive Engine Refill Capacities and Recommendations
2010/08/23 New Locknuts for the Exhaust Manifold Are Available for Certain Commercial Engines {1059}
3512C HD Locomotive Engine After Stopping Engine
3512C HD Locomotive Engine Engine Oil Level - Check
2010/09/17 New Silicone Power Cables Are Now Used For Power Connections On Certain Cat Generator Sets {1408, 4460}
C27 Generator Set Overhaul Considerations
3512C HD Locomotive Engine Belts - Inspect/Adjust/Replace
3512C HD Locomotive Engine Cooling System Coolant (DEAC) - Change
2010/08/23 Use Proper Procedures with Speed/Timing Sensor Diagnostic Codes for C175 Generator Set Engines {1408, 1439, 1912}
C9.3 Tier 4 Interim Engines Diesel Particulate Filter Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
G3304B and G3306B Engines Cover Group (Front Housing)
2012/06/29 A New Engine Oil Filter Element Is Used for Certain C175-16 Engines {1306, 1308}