Cover Group (Front Housing)
Show/hide table
| 图 1 | g02229573 |
后视图 | |
(1) 两个螺栓的扭矩 ... 100 ± 10 N·m (74 ± 7 lb ft)
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C9.3 Tier 4 Interim Engines Diesel Particulate Filter Temperature Is High
2010/08/23 Use Proper Procedures with Speed/Timing Sensor Diagnostic Codes for C175 Generator Set Engines {1408, 1439, 1912}
3512C HD Locomotive Engine Cooling System Coolant (DEAC) - Change
3512C HD Locomotive Engine Belts - Inspect/Adjust/Replace
C27 Generator Set Overhaul Considerations
2010/09/17 New Silicone Power Cables Are Now Used For Power Connections On Certain Cat Generator Sets {1408, 4460}
3512C HD Locomotive Engine Engine Oil Level - Check
3512C HD Locomotive Engine After Stopping Engine
2010/08/23 New Locknuts for the Exhaust Manifold Are Available for Certain Commercial Engines {1059}
2010/08/23 New Locknuts for the Exhaust Manifold Are Available for Certain Truck Engines {1059}
C27 and C32 Industrial Engines Camshaft Position Sensor - Remove and Install
2012/06/29 A New Engine Oil Filter Element Is Used for Certain C175-16 Engines {1306, 1308}
120 and 120 AWD Motor Grader Scarifier Digging Angle - If Equipped
C27 and C32 Industrial Engines Coolant Temperature Sensor - Remove and Install
120 and 120 AWD Motor Grader Axle Oscillation Bearings - Lubricate
120 and 120 AWD Motor Grader Drawbar Ball and Socket - Lubricate
3512C Oil Well Service Engines Safety Messages
2011/01/10 A New Wiring Harness Kit Is Available in Order to Make Repairs on Certain Truck Engines {1254, 1290, 1408}
2010/12/06 A New Injector Wiring Harness Kit Is Available to Make Repairs on Certain Commercial Engines {1254, 1290, 1408}
120 and 120 AWD Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
3512C Oil Well Service Engines Product Lifting
3516C Locomotive Engines Selective Catalytic Reduction Module - Disassemble
XQ Auto Paralleling Initial Startup Procedure