2012/06/29 Caterpillar


A New Engine Oil Filter Element Is Used for Certain C175-16 Engines {1306, 1308}

Usage:

C175-16 P6L
Generator Set:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: P6L1-UP)
Engine News SEBD9758, 1 February 2012, "A New Engine Oil Filter Element Is Used for C175-16 Generator Set Engines". The original article was revised to add S/N:P6L
. No other information was changed.

Description of Change: The filtration efficiency of the new filter element is the same as the previous filter element. The new filter element is from a different supplier.

Adaptable To: The new 368-0066 Engine Oil Filter Element replaces the canceled 354-1560 Engine Oil Filter Element, which replaced the previous 249-2340 Engine Oil Filter Element .

The new element is adaptable back to first production.

The new element is effective with the following serial numbers:

  • P6L01010

  • WYB00638

Caterpillar Information System:

G3304B and G3306B Engines Cover Group (Front Housing)
C27 and C32 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C9.3 Tier 4 Interim Engines Diesel Particulate Filter Temperature Is High
2010/08/23 Use Proper Procedures with Speed/Timing Sensor Diagnostic Codes for C175 Generator Set Engines {1408, 1439, 1912}
3512C HD Locomotive Engine Cooling System Coolant (DEAC) - Change
3512C HD Locomotive Engine Belts - Inspect/Adjust/Replace
C27 Generator Set Overhaul Considerations
2010/09/17 New Silicone Power Cables Are Now Used For Power Connections On Certain Cat Generator Sets {1408, 4460}
3512C HD Locomotive Engine Engine Oil Level - Check
3512C HD Locomotive Engine After Stopping Engine
2010/08/23 New Locknuts for the Exhaust Manifold Are Available for Certain Commercial Engines {1059}
2010/08/23 New Locknuts for the Exhaust Manifold Are Available for Certain Truck Engines {1059}
120 and 120 AWD Motor Grader Scarifier Digging Angle - If Equipped
C27 and C32 Industrial Engines Coolant Temperature Sensor - Remove and Install
120 and 120 AWD Motor Grader Axle Oscillation Bearings - Lubricate
120 and 120 AWD Motor Grader Drawbar Ball and Socket - Lubricate
3512C Oil Well Service Engines Safety Messages
2011/01/10 A New Wiring Harness Kit Is Available in Order to Make Repairs on Certain Truck Engines {1254, 1290, 1408}
2010/12/06 A New Injector Wiring Harness Kit Is Available to Make Repairs on Certain Commercial Engines {1254, 1290, 1408}
120 and 120 AWD Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
3512C Oil Well Service Engines Product Lifting
3516C Locomotive Engines Selective Catalytic Reduction Module - Disassemble
XQ Auto Paralleling Initial Startup Procedure
XQ Auto Paralleling Installation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.