"CXP Fluids" Are Now "Cat Fluids" {0645}
Usage:
Caterpillar's fluids program in North America is now about two years old. To avoid confusion in the field, Caterpillar's fluids products will now be called "Cat Diesel Engine Oil", "Cat Engine Oil", "Cat Hydraulic Oil", "Cat Drive Transmission and Drive Train Oil", "Cat Gear Oil", etc. It was decided to capitalize on the equity of the Cat name and new corporate identity. "Cat fluids" will be used to describe this group of products and "Cat" will become part of the product description.
The CXP name will be gradually phased out since there are still many containers with CXP labels. These will be used until supplies are exhausted. The oil products will not be affected by the name change.
Caterpillar Information System:
1989/05/29 Maintenance Inspection Of Emergency Shutdown Systems Required Every 1000 Hours {7400}
1989/05/29 New Extension Assembly Used In Gas Engine Ignition Groups {1558}
1989/05/29 New Upper and Lower Seals For Folded Core Radiators In Cold Temperature Applications {1353}
1989/05/22 New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22 Check Valve Added To Fuel Injection Lines {1274}
1989/05/22 New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22 Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22 Vibration Measurement System For Caterpillar Products {0781,0783,0784}
1989/05/15 New Installation Procedure For Unit Injectors {1290}
1989/05/15 Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15 New Head Gasket Used {1124}
1989/05/15 New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/06/19 Identification Of Asbestos-Free Material{0353,0112,0648}
1989/06/19 Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19 New Seal Used In Auxiliary Water Pump Groups{1361}
1989/06/19 New Pistons Used With Two Keystone Compression Rings{1156,1205,1214,1215}
1989/06/26 Air Vent Line Improves Cooling System Performance{1395,1350}
1989/06/26 Change Routing Of Heater Return Hose To Improve Heater Efficiency{7304,1361}
1989/06/26 Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids{1205}
1989/06/26 New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/07/03 Air Conditioning Service Tooling{0757,0786,7320}
1989/07/03 Use Same Torque For All Sizes Of Threaded Crown Hydraulic Cylinders{5100,7562}
1989/07/10 New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10 New, Larger Vibration Damper Improves Wear Life{1205}