1979/02/19 Caterpillar


Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}

Usage:


1100 and 3100 Series Engines;
3204 and 3208 Engines

Description of Change: The engine valve springs used in the above models are now made of a different steel alloy than the former valve springs. The new valve springs are made of a carbon steel alloy and will give longer service life than the former springs.

Adaptable As: The new 9N3617 Valve Spring is a direct replacement for the former 9N3387 Valve Spring which is canceled.

Caterpillar Information System:

1979/02/19 New Exhaust Pipe Connector Makes A Tighter Seal Between Pipe And Manifold{1061,1059}
1979/02/19 New Exhaust Valve And Valve Guide{1104,1105}
1979/02/19 Modification Of 5P9726 Plug Gauge That Is Used To Check Brake Wear{0653}
1979/02/19 Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19 Use SIRS To Keep Service Literature Current{0374}
1979/02/05 High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05 Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05 Federal Law Prohibits Tampering With Noise Control Systems{0116}
1979/01/29 Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/22 Ether Starting Aid Groups Are Now Available{1456}
1979/01/22 New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22 Current Chart For Dynamometer Adapters{0651,1000}
1979/03/05 Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05 New Engine Cylinder Block Used{1201}
1979/03/05 New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05 New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05 New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05 Engine Mounted Exhaust Brake Systems Can Be Used To Extend Service Brake Life{1050}
1979/03/12 New Larger Capacity Water Separator Is Available{1250}
1979/03/12 Retroreflective Tape Makes Phototach Kit Easier To Read{0651,0653}
1979/03/12 New Manifold Assembly Gives More Room For The Lifting Eye{1059}
1979/03/12 SAE 15W/40 Multiviscosity Oil Can Be Used In Engines, Transmissions And Final Drives{1318,3067,3179,4070}
1979/03/12 New Design Fuel Injection Valve Body Used In Fuel Injection Lines Group{1252,1254}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.