Inlet and Exhaust Valve Guides - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-9169     | Valve Guide Driver     | 1     |
Start By:
- Remove the inlet valves and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove the valve guides from the cylinder head assembly.
Show/hide table
Illustration 1 | g01015291 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
B     | 124-9057     | Guide Collar     | 1     |
9U-6895 | Valve Guide Driver     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (B) to install valve guides (1) . Install the valve guides until Length (X) is 20.0 ± 0.5 mm (0.79 ± 0.02 inch) above the cylinder head assembly.
Show/hide table
Illustration 2 | g02676390 |
End By: Install the inlet valves and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Caterpillar Information System:
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
PM3516 Power Modules Fumes Disposal Filter Element - Replace
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
C9 On-highway Engine Diesel Particulate Filter
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
C9 Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace - Heavy Duty Closed Crankcase Ventilation Fumes Disposal Filter (If Equipped)
C15 and C18 Industrial Engines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C7.1 Industrial Engine and Generator Set Electrical Connectors - Inspect
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger