Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Start By:
- Remove the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) in order to remove oil filter (5).
- Disconnect hose assemblies (1).
- Remove bolts (2).
- Remove bolts (4).
- Remove bolts (3).
- Remove oil filter base (6).
Show/hide table
Illustration 1 | g01010791 |
Caterpillar Information System:
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
PM3516 Power Modules Fumes Disposal Filter Element - Replace
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
C9 On-highway Engine Diesel Particulate Filter
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
C9 Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace - Heavy Duty Closed Crankcase Ventilation Fumes Disposal Filter (If Equipped)
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C13 Engine Water Pump - Remove