Diesel Particulate Filter Temperature and Pressure Sensor
Show/hide table
 | |
| Illustration 1 | g01884714 |
(1) Final installation torque for the fitting ... 11 ± 2 N·m (8 ± 1.5 lb ft)
(2) Final installation torque for the temperature and pressure sensors ... 45 ± 5 N·m (33 ± 4 lb ft)
Operating voltage ... 4.75 to 5.25 VDC
Output type ... Analog
Operating temperature ... −40 to 900 °C (−40 to 1652 °F)
Operating Pressure ... 0 to 35 kPa (0 to 5.1 psi)
Caterpillar Information System:
PM3516 Power Modules Fumes Disposal Filter Element - Replace
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
C9 On-highway Engine Diesel Particulate Filter
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
C9 Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace - Heavy Duty Closed Crankcase Ventilation Fumes Disposal Filter (If Equipped)
C15 and C18 Industrial Engines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C7.1 Industrial Engine and Generator Set Electrical Connectors - Inspect
C13 Engine Electronic Unit Injector Sleeve - Install
C13 Engine Electronic Unit Injector Sleeve - Remove
C13 Engine Electronic Unit Injector - Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Pump - Disassemble