Diesel Particulate Filter
Show/hide table
 | |
| Illustration 1 | g01884415 |
(1) Torque for two clamps ... 11.3 ± 1.2 N·m (100 ± 11 lb in)
(2) Torque for two straps ... 8.5 ± 1.2 N·m (75 ± 11 lb in)
(3) Apply 4C-5599 Anti-Seize Compound to the bottom three threads of temperature probe.
Caterpillar Information System:
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
C9 Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace - Heavy Duty Closed Crankcase Ventilation Fumes Disposal Filter (If Equipped)
C15 and C18 Industrial Engines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C7.1 Industrial Engine and Generator Set Electrical Connectors - Inspect
C13 Engine Electronic Unit Injector Sleeve - Install
C13 Engine Electronic Unit Injector Sleeve - Remove
C13 Engine Electronic Unit Injector - Install
C13 Engine Electronic Unit Injector - Remove
C13 Engine Fuel Transfer Pump - Install
C13 Engine Fuel Transfer Pump - Remove
C13, C15, and C18 Tier 4 Interim Engines ARD Nozzle - Test
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
PM3516 Power Modules Fumes Disposal Filter Element - Replace
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Assemble