Fuel Transfer Pump - Remove
- Disconnect hose assembly (1).
- Disconnect tube assemblies (2).
- Remove bolts (3).
- Remove fuel transfer pump (4).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g01131526 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Interim Engines ARD Nozzle - Test
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Temperature Sensor (Aftercooler Air) - Remove and Install
C13 Engine for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C4.4 Industrial Engine Battery - Replace
C9.3 Engines for Caterpillar Built Machines Diagnostic Capabilities
C13 Engine for Caterpillar Built Machines Cylinder Head - Remove and Install
2009/04/01 Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
2009/04/13 Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
C13 Engine Fuel Transfer Pump - Install
C13 Engine Electronic Unit Injector - Remove
C13 Engine Electronic Unit Injector - Install
C13 Engine Electronic Unit Injector Sleeve - Remove
C13 Engine Electronic Unit Injector Sleeve - Install
C7.1 Industrial Engine and Generator Set Electrical Connectors - Inspect
C15 and C18 Industrial Engines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C9 Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace - Heavy Duty Closed Crankcase Ventilation Fumes Disposal Filter (If Equipped)
An Improved Filter Element for the Power Train has Been Released{3067, 5068} An Improved Filter Element for the Power Train has Been Released{3067, 5068}
C9 On-highway Engine Diesel Particulate Filter
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel