Inlet Manifold - Remove and Install
- Disconnect harness assemblies (1).
- Disconnect hose assembly (3).
- Remove clamp (4). Disconnect tube assembly (2).
Show/hide table
Illustration 2 g01882885 - Remove clip (5).
- Disconnect harness assemblies (7). Remove bolts (6) and nuts (8).
- Remove inlet manifold (9).
Show/hide table
Illustration 1 | g01882884 |
- Install inlet manifold (9) in reverse order of removal.
Caterpillar Information System:
C4.4 Industrial Engine Battery - Replace
C9.3 Engines for Caterpillar Built Machines Diagnostic Capabilities
C13 Engine for Caterpillar Built Machines Cylinder Head - Remove and Install
2009/04/01 Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
2009/04/13 Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
C6.6 Industrial Engine Refill Capacities and Recommendations
C7.1 Industrial Engine and Generator Set Valve Lash Is Excessive
C15 and C18 Industrial Engines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
C18 Power Module Maintenance Interval Schedule - Standby
C18 Power Module Maintenance Interval Schedule
C7.1 Industrial Engine and Generator Set Cylinder Is Noisy
C7.1 Industrial Engine and Generator Set Engine Has Mechanical Noise (Knock)
C13 Engine for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Temperature Sensor (Aftercooler Air) - Remove and Install
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C13, C15, and C18 Tier 4 Interim Engines ARD Nozzle - Test
C13 Engine Fuel Transfer Pump - Remove
C13 Engine Fuel Transfer Pump - Install
C13 Engine Electronic Unit Injector - Remove
C13 Engine Electronic Unit Injector - Install
C13 Engine Electronic Unit Injector Sleeve - Remove
C13 Engine Electronic Unit Injector Sleeve - Install