Engine Oil Filter Base - Install
- Position oil filter base (6).
- Install bolts (2).
- Install bolts (4).
- Install bolts (3).
- Connect hose assemblies (1).
- Install oil filter (5).
Show/hide table
Illustration 1 | g01010791 |
End By:
- Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Caterpillar Information System:
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
PM3516 Power Modules Fumes Disposal Filter Element - Replace
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
Cat Commercial Diesel Engine Fluids Recommendations Biodiesel
G3516 Power Module Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Cooler - Install
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
C13 Engine Water Temperature Regulator - Remove and Install
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}