Parts For Caterpillar Switch Gear Are Now Available {4491}
- Power Module:
- C32 POWER MODUL (S/N: MED1-UP)
- PM3508 (S/N: BLM1-UP)
- PM3512 (S/N: BNR1-UP)
- PM3516 (S/N: KEN1-UP)
Description of Change: The parts that are listed in Table 1 are now available. Information regarding these parts is available at the following web site:
www.catswitchgear.comShow/hide table
Part Number     | Item     | Description     |
---|---|---|
329-2467     | Control Module     | A Schneider Electric GRCIO Programmable Logic Controller with a 760 processor (1)     |
330-2221     | Control Module     | A Schneider Electric GRCIO and UIO Programmable Logic Controller with a 780 processor     |
329-2466     | Control Module     | G1IO Programmable Logic Controller with a 780 processor (2) (3) (4)     |
329-2464     | Display Module     |     |
286-2583     | Connector     |     |
286-2585     | Connector     |     |
324-2641     | Electrical Cable     |     |
288-2657     | Cable Kit     |     |
Show/hide table
( 1 ) | Used with the following switchgear: 300-7399, 313-3942, 331-3167 and 333-1641 |
( 2 ) | Used on all part numbers. |
( 3 ) | The 780 processor allows a program to be flashed into memory. |
( 4 ) | After flashing, the program will not be erased if power is lost. |
Adaptable To: The part numbers that are listed in Table 1 are adaptable to the products that are listed above.
Caterpillar Information System:
2009/04/06 New Information Is Available For Intelligent Switchgear Organization (ISO) Products {4491}
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Assemble
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Disassemble
Guidelines for Inspection of the 303-8189 Flexible Coupling Gp {3252, 4450} Guidelines for Inspection of the 303-8189 Flexible Coupling Gp {3252, 4450}
C13 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 14
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 09
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 02
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0811 - FMI 09
2009/04/27 New Software for C15 Generator Sets Is Available {1901, 1920}
C13 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install - Venturi
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0590 - FMI 14
3054B Industrial Engine Rocker Shaft and Pushrod - Remove
3054B Industrial Engine Engine Oil Bypass Valve - Remove and Install
3054B Industrial Engine Rocker Shaft and Pushrod - Install
C18 Marine Engines Overhaul (Top End)
C7.1 Industrial Engine Safety Messages
Replacement of the Fuel Manifold (Rail){1251, 1290} Replacement of the Fuel Manifold (Rail){1251, 1290}
C7.1 Industrial Engine General Hazard Information
C9.3 Tier 4 Interim Engines Fuel Rail Pressure Is Low
CX31-P600 Petroleum Transmission Transmission Warm-up
CX31-P600 Petroleum Transmission Transmission Control
CX31-P600 Petroleum Transmission Retarder Operation
CX31-P600 Petroleum Transmission Transmission Cooling System