C13 Engine for Caterpillar Built Machines Caterpillar


Exhaust Gas Valve (NRS) - Disassemble

Usage:

730C2 2T4

Disassembly Procedure

Start By:

  1. Remove the exhaust gas valve.


    Illustration 1g02173623

  1. Remove temperature sensor (1).

  2. Remove bolts (2). Separate actuator assembly (3) from valve housing (4).


    Illustration 2g01845473

  3. Remove nut (8), washer (7), and solenoid (6).

  4. Remove spool (5).


    Illustration 3g02173629

  5. Remove O-rings (9).

Caterpillar Information System:

Guidelines for Inspection of the 303-8189 Flexible Coupling Gp {3252, 4450} Guidelines for Inspection of the 303-8189 Flexible Coupling Gp {3252, 4450}
C13 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 14
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 09
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 1273 - FMI 02
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0811 - FMI 09
2009/04/27 New Software for C15 Generator Sets Is Available {1901, 1920}
C13 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install - Venturi
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0590 - FMI 14
2009/04/13 New Software Is Available for C18 Marine Engines {1901, 1920}
Update to the Wiring Harness and the Electrical System on Some C-15 Engines for Hazardous Locations{1000, 1408, 1901} Update to the Wiring Harness and the Electrical System on Some C-15 Engines for Hazardous Locations{1000, 1408, 1901}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0590 - FMI 09
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Assemble
2009/04/06 New Information Is Available For Intelligent Switchgear Organization (ISO) Products {4491}
2009/04/13 Parts For Caterpillar Switch Gear Are Now Available {4491}
3054B Industrial Engine Rocker Shaft and Pushrod - Remove
3054B Industrial Engine Engine Oil Bypass Valve - Remove and Install
3054B Industrial Engine Rocker Shaft and Pushrod - Install
C18 Marine Engines Overhaul (Top End)
C7.1 Industrial Engine Safety Messages
Replacement of the Fuel Manifold (Rail){1251, 1290} Replacement of the Fuel Manifold (Rail){1251, 1290}
C7.1 Industrial Engine General Hazard Information
C9.3 Tier 4 Interim Engines Fuel Rail Pressure Is Low
CX31-P600 Petroleum Transmission Transmission Warm-up
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.