1988/04/25 Caterpillar

New 1U8115 Generator Test Lead Set With Insulated Tips {0785}

Usage:

The new 1U8115 Test Lead Set is available for testing energized electrical circuits. This test lead set is designed to work with the current 6V7800 and 6V7070 Multimeters which have 9.50 mm (.375") diameter input connectors. The new test lead probes have spring-loaded insulating sleeves over the tips of the metal probes. This will help prevent the probes from making accidental electrical contact with wires and terminals during testing. Normally, only the very tip of the new probe is exposed. However, the spring-loaded insulating sleeve on the probe can be pushed back to uncover more of the probe tip. Also, the insulating sleeve can be pushed back and locked in position to uncover approximately 6.3 mm (.25") of probe tip. The new test lead set is rated for a maximum of 700 volts AC or DC. Each set contains one red and one black 1378 mm (54.0") long lead. The connector on each test lead is a standard banana plug with a 9.50 mm (.375") diameter protective cover. The leads cannot be used on earlier multimeters with larger diameter input connectors.

New 1U8115 Test Lead Set.

Caterpillar Information System:

1988/04/18 Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}

1988/04/18 Former Exhaust Valve Bridge For Jacobs Brake® Interferes With 40 mm Nozzle Adapter; New Bridge Used{1119,1100}

1988/04/18 How To Identify Failures To Electric Jacket Water Heaters{1383}

1988/04/18 1" 8T9141 Offset Sledging Wrench Available{0602}

1988/04/18 Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}

1988/04/18 Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}

1988/04/04 Fuel Ratio Control Diaphragms And Settings On 3161 Governors{1278}

1988/04/04 Stepped Compression Ring Temporarily Used{1214,1215}

1988/04/04 Use Improved Heat Start Switch{1416}

1988/04/04 Method To Reduce Indicator Contact Point Breakage{0760}

1988/04/04 Sealed Beam Halogen Lamps Are Available{7309}

1988/03/28 Polarity Corrections On Wiring Diagrams{4450}

1988/04/25 New Diaphragm For Brakesaver Control Valve {1159,1155}

1988/04/25 New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}

1988/04/25 Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}

1988/05/02 Diode Added To Prevent Damage To Time Delay Relay {7421}

1988/05/09 Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}

1988/05/09 New 1U6392 Pressure Reducing Valve Regulates Pressure To Hydraulic Pumps During Bench Testing {0784}

1988/05/16 9G7641 Start Switch Is Improved{1416,1400}

1988/05/23 New 1U9139 Universal Fuel Line Pickup Available{0775}

1988/05/23 Four New Swivel Tee Fittings Can Be Used For In-Line Pressure Testing{0784}

1988/05/23 Larger Capacity Refrigerant Charging Cylinders Available For Charging Air Conditioner Systems{0647,7320}

1988/05/23 New Engine Lifting Bracket Available{0632}

1988/05/23 Ways To Prevent Overcooling Of 3306B (63Z, 76R) Truck Engines{1355}