1988/05/02 Caterpillar


Diode Added To Prevent Damage To Time Delay Relay {7421}

Usage:


All Marine, Industrial, Generator Set Engines Except 3600 Family Of Engines

Reference: Service Magazine; October 21, 1985; Page 4, "Engine Shuts Down Immediately After Start-up". Service Magazine; February 13, 1984; Page 5, "Engine Will Not Restart Immediately After It Has Been Shutdown".

Description of Change: The above engines have a 4W8471 Relay. This is a 70 second time delay relay (TDR) to make sure the engine stops completely when it is shutdown. A diode has been added to the circuit connected to the TDR to prevent damage to the TDR from high voltage spikes.

Adaptable To: The 5N4988 Diode Assembly can be adapted to only the affected engines previously modified in the field to make it possible to override the 70 second TDR. This field modification has allowed voltage spikes to damage the TDR. Current production does contain a redesigned override feature that prevents damage to the TDR from voltage spikes. The control panel circuits on the earlier engines could have been modified in the field in one of two ways, depending on the design of the circuit.

For circuits modified according to the first Reference Article (read Solution B), use Illustration 1. On these engines, the junction box jumper between terminals 27 and 28 has been removed, and terminal 27 has been connected to the output side of the electric starter magnetic switch (solenoid). Simply connect the new diode between 27 and 28 as shown.


Illustration 1. Diode added to engines previously modified according to the Service Magazine of October 21, 1985.

For circuits modified according to the second Reference Article, use Illustration 2. Disconnect B- wire at 3 Neg terminal on the TDR. Connect the new diode to the B- wire and to the 3 Neg terminal as shown.


Illustration 2. Diode added to engines previously modified according to the February 13, 1984 Service Magazine.

Caterpillar Information System:

1988/04/25 Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25 New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25 New Diaphragm For Brakesaver Control Valve {1159,1155}
1988/04/25 New 1U8115 Generator Test Lead Set With Insulated Tips {0785}
1988/04/18 Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/18 Former Exhaust Valve Bridge For Jacobs Brake® Interferes With 40 mm Nozzle Adapter; New Bridge Used{1119,1100}
1988/04/18 How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18 1" 8T9141 Offset Sledging Wrench Available{0602}
1988/04/18 Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18 Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/04 Fuel Ratio Control Diaphragms And Settings On 3161 Governors{1278}
1988/04/04 Stepped Compression Ring Temporarily Used{1214,1215}
1988/05/09 Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}
1988/05/09 New 1U6392 Pressure Reducing Valve Regulates Pressure To Hydraulic Pumps During Bench Testing {0784}
1988/05/16 9G7641 Start Switch Is Improved{1416,1400}
1988/05/23 New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23 Four New Swivel Tee Fittings Can Be Used For In-Line Pressure Testing{0784}
1988/05/23 Larger Capacity Refrigerant Charging Cylinders Available For Charging Air Conditioner Systems{0647,7320}
1988/05/23 New Engine Lifting Bracket Available{0632}
1988/05/23 Ways To Prevent Overcooling Of 3306B (63Z, 76R) Truck Engines{1355}
1988/05/23 New Components Used In Water Lines Groups{1350}
1988/05/23 New Adapters Have Orifice To Extend Life of Fuel Pressure Gauges{7456}
1988/06/06 Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06 Lubricant Supplements List Specifications For CXP Lubricants{0645,7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.