1988/03/28 Caterpillar


Polarity Corrections On Wiring Diagrams{4450}

Usage:


All SR-4 Generators With VR3 Voltage Regulators

The VR3 wiring diagram mounted on SR4 Generators may show F1 lead as "negative" instead of "positive", and F2 lead as "positive" instead of "negative". If this is the situation, change the marks on these two leads on the diagram.

Also, refer to the VR3 Voltage Regulator Supplement, SENR3473, for SR-4 Generators (Self-Excited), Page 14. In the first illustration, change "F1-" to "F1+", and "F2+" to "F2-".

Caterpillar Information System:

1988/03/28 New 1U6602 Tachometer Group Available{0775,0781}
1988/03/21 New Power Pad Housings With Needle Bearings Used In Fuel Injection Control Groups{1264}
1988/03/21 New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21 Service Tools For Reintjes Marine Gears{0723}
1988/03/14 New Connecting Rod Assembly Used{1218}
1988/03/14 New Auxiliary Water Pump Group Used{1371}
1988/03/14 Use The Correct Oil In Spark-Ignited Engines{1300}
1988/03/14 Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14 Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14 New 1U8761 Portable Hydraulic Tester Available{0784,0774,0770,0776}
1988/03/07 Install New Temperature Regulators Every 7500 Hours Or After One Year{1318,1330,1350,1355}
1988/03/07 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP){0781,0782,0600}
1988/04/04 Sealed Beam Halogen Lamps Are Available{7309}
1988/04/04 Method To Reduce Indicator Contact Point Breakage{0760}
1988/04/04 Use Improved Heat Start Switch{1416}
1988/04/04 Stepped Compression Ring Temporarily Used{1214,1215}
1988/04/04 Fuel Ratio Control Diaphragms And Settings On 3161 Governors{1278}
1988/04/18 Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18 Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18 1" 8T9141 Offset Sledging Wrench Available{0602}
1988/04/18 How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18 Former Exhaust Valve Bridge For Jacobs Brake® Interferes With 40 mm Nozzle Adapter; New Bridge Used{1119,1100}
1988/04/18 Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/25 New 1U8115 Generator Test Lead Set With Insulated Tips {0785}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.