C6.6 Marine Generator Set Caterpillar

The Electronic Control Module (ECM) detects one or more of the following conditions:

• One or more of the following configuration parameters are not programmed. The effect on the ECM depends on the parameter.

• FLS or FTS

• Trim codes for the injectors

• Engine serial number

• All of the injector trim files are not loaded into the ECM. Engine performance and emissions are affected.

System Response:

Note: The fault is not logged.

The electronic service tool will display a list of the condition(s) on the "Active Diagnostics" screen that must be resolved. A warning will appear on the display on the control panel. If equipped, the diagnostic lamp will flash the diagnostic code.

Engine performance and emissions are affected.

Use the electronic service tool to correct parameters that have not been programmed or parameters that have been incorrectly programmed.

Test Step 1. Perform the following diagnostic procedure: Flash Programming

Results:

• OK - STOP