Radiator - Disassemble - Air to Air Charge Cooler
Start By:
- Remove the radiator. Refer to Disassembly and Assembly, "Radiator - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Place the front face of air to air charge cooler radiator assembly (3) onto a suitable support.
- Remove bolts and locking nuts (1). Remove bolts and locking nuts (4).
- Remove bolts and locking nuts (2) (not shown). Remove bolts and locking nuts (5).
- Remove support brackets (6) from air to air charge cooler radiator (3).
Show/hide table
Illustration 2 g01713198 - Remove side tank (7) from air to air charge cooler radiator (3).
- Remove radiator cores (8) from air to air charge cooler radiator (3).
- Remove seals (10) from side tank (7). Remove seals (9) from side tank (12).
- Remove seals (11) from radiator cores (8).
Show/hide table
Illustration 1 | g01711694 |
Caterpillar Information System:
C6.6 Marine Generator Set Radiator - Install - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Remove - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Assemble
C6.6 Marine Generator Set Radiator - Disassemble
C6.6 Marine Generator Set Radiator - Install
C6.6 Marine Generator Set Radiator - Remove
An "Unexpected Engine Shutdown" is Occurring{1251, 1716} An "Unexpected Engine Shutdown" is Occurring{1251, 1716}
3500B Generator Sets Product Description
2008/10/01 New Control Valves are Now Used {108M, 3206, 5479}
Process for Communicating an Incident with a Battery{1401} Process for Communicating an Incident with a Battery{1401}
Procedure for Obtaining the Serial Number of a Diesel Particulate Filter (DPF) and Inspection for an Open Service Letter{108F} Procedure for Obtaining the Serial Number of a Diesel Particulate Filter (DPF) and Inspection for an Open Service Letter{108F}
C6.6 Marine Generator Set Walk-Around Inspection
C6.6 Marine Generator Set Radiator - Assemble - Air to Air Charge Cooler
G3304 and G3306 Engines Engine Speed Sensor
C6.6 Marine Generator Set Crankcase Breather
2010/04/30 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
3500B Engines for Caterpillar Built Power Modules Engine Speed/Timing Sensor
3500 Generator Sets Varistor - Inspect
C15 and C18 Petroleum Generator Sets Varistor - Check
C6.6 Marine Generator Set Vibration Damper and Pulley
2008/10/06 New Software is Available for 3126B Industrial Engines {1901, 1920}
3500 Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules (If equipped)
C175-16 Marine Engines Engine Oil Level - Check
C175-16 Marine Engines Engine Crankcase Breather - Clean