Vibration Damper and Pulley
Show/hide table
 | |
| Illustration 1 | g01686365 |
(1) Crankshaft adapter (2) Pulley (3) Vibration damper | |
(4) Torque for the bolt ... 115 N·m (85 lb ft)
Split Lock Assembly
Show/hide table
 | |
| Illustration 2 | g01686361 |
(1) Crankshaft adapter (2) Thrust block (3) O-ring (5) Spacer (6) Split lock rings | |
(4) Torque for the Torx bolt ... 200 N·m (148 lb ft)
Engine Turning Tool
Show/hide table
 | |
| Illustration 3 | g01684294 |
(1) Vibration damper (2) Engine turning tool | |
(3) Torque for the bolts that retain the vibration damper and the engine turning tool ... 115 N·m (85 lb ft)
Power Take-Off
Show/hide table
 | |
| Illustration 4 | g01684055 |
(1) Vibration damper (2) Power take-off shaft (3) Key | |
(4) Torque for the bolt that retains the power take-off shaft ... 115 N·m (85 lb ft)
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Varistor - Check
3500 Generator Sets Varistor - Inspect
3500B Engines for Caterpillar Built Power Modules Engine Speed/Timing Sensor
2010/04/30 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
C6.6 Marine Generator Set Crankcase Breather
G3304 and G3306 Engines Engine Speed Sensor
C6.6 Marine Generator Set Radiator - Assemble - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Disassemble - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Install - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Remove - Air to Air Charge Cooler
C6.6 Marine Generator Set Radiator - Assemble
C6.6 Marine Generator Set Radiator - Disassemble
2008/10/06 New Software is Available for 3126B Industrial Engines {1901, 1920}
3500 Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules (If equipped)
C175-16 Marine Engines Engine Oil Level - Check
C175-16 Marine Engines Engine Crankcase Breather - Clean
3516C Generator Sets Emissions Certification Film
3500 Industrial Engines Stub Shaft (Front)
390D Excavator Mirror - If Equipped
3500 Generator Set Engines Vibration Damper
R250 Automatic Voltage Regulator Specifications
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
R250 Automatic Voltage Regulator System Operation
2008/11/03 Requirements for Application and Maintenance for 5000, 6000, and 7000 Series of Generators {1021, 1404, 4450, 7002}