6V106 Post, 6V107 Stop And 6V108 Cap Now Available For Parts Service Of The 7S1100 Hose Press Arrangement{0660}
Usage:
The 6V106 Post, 6V107 Stop and 6V108 Cap shown in Illustration 1 are now available for parts service of the 7S1100 Hose Press Arrangement. These parts are used to hold the 1V1874 Clamping Bar in position as shown in Illustration 2. The new serviced parts are held in position by the 5S2586 Screw.
Illustration 1. 6V106 Post, 6V107 Stop and 6V108 Cap.
Illustration 2. Location of new parts in the 5S5801 Hydraulic Press Group which is part of the 7S1100 Hose Press Arrangement.
Caterpillar Information System:
1978/11/06 New Control Cover Gives Better Control Of Exhaust Gas Recirculation System{1080,1250}
1978/11/06 Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/10/30 6V92 Plug Socket Is Available For The Removal And Installation Of Lubricant Plugs{0612}
1978/10/30 New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/23 In The Future There Will Be A Common Warning System For All Caterpillar Machines{7450,7301,7400}
1978/10/23 5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23 Conversion Of Testers In Earlier 1P3550 Wiring Harness Tester Groups To Use Later Test Harness Assemblies With Receptacle Connections{0650,0651,1408}
1978/10/16 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/10/16 New Transmission Mounting Group Has Improved Design For Longer Service Life{1150,3000}
1978/10/16 Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16 Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16 New Switch Group Used In Several Applications{1416}
1978/11/20 Single Coil Shut-Off Solenoid Used In Place Of Dual (Two) Coil Shut-Off Solenoid{1259}
1978/11/20 Sender Unit For Engine Oil Pressure Gauge Moved To New Location On Truck Cab{7455}
1978/11/20 A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/27 New Hose Has More Resistance To Heat{1074}
1978/11/27 New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/12/04 Stronger Fan Adjustment Bracket Used In Fan Drive Group{1358,1359}
1978/12/04 Some Force Is Needed To Turn The Drive Shaft In All Tyrone Gear-Type Pumps; New Torque Value For Body Bolts Of Tyrone Gear-Type Pumps{5073}
1978/12/04 New Design Brace Used In 4N2905 Air Cleaner Group{1051}
1978/12/04 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1978/12/04 90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/11 New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11 New Electric Service Meter Used{7480}