C4.4 Industrial Engine Caterpillar


Engine Rating Definitions

Usage:

C4.4 444
了解发动机的使用情况对选择与运转工况的曲线图表相匹配的额定功率来说很重要。 正确的额定功率的选择对实现用户的价格和价值期待也很重要。

为特定应用选择额定功率时,最重要的考虑因素是船只在全油门使用的时间。 额定等级定义确定了在全油门运转的时间百分比。 这些定义也同时确定了在额定转速以下运转的相应时间。

注: 为准确确定适当的额定功率,请遵循原始设备制造商(OEM)的规范,或咨询您的卡特彼勒代理商。

有五种额定值A - E。 C4.4 工业发动机的额定值是 C。

C - 间歇性使用与最大功率和/或转速循环变化的场合。 满负荷运转的发动机不应超过负载循环的50%。


注意

以超过额定功率定义的规定来运转发动机会导致发动机大修前的使用寿命缩短。


Caterpillar Information System:

3500C Marine Engines Camshaft
C18 Industrial Engines Monitoring System
793F and 793F XQ Off-Highway Truck Fast Fill Service System General Information
345D, 349D and 349D2 Excavators Hydraulic System Swing Hydraulic System
Repairing the Fuel Injector Rocker Arm{1102, 1123, 1290} Repairing the Fuel Injector Rocker Arm{1102, 1123, 1290}
2008/04/01 A New Valve Cover is Used {1100, 1120}
345D, 349D and 349D2 Excavators Hydraulic System Bucket Hydraulic System
345D, 349D and 349D2 Excavators Hydraulic System Control Valve (Stick Lowering)
345D, 349D and 349D2 Excavators Hydraulic System Stick Hydraulic System
C4.4 Industrial Engine Fuel Filter
345D, 349D and 349D2 Excavators Hydraulic System Control Valve (Boom Lowering) - If equipped
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Liquid Level Switch (Steering Tank)
C4.4 Industrial Engine Engine Rating Conditions
3500B Locomotive Engines Configuration Parameters
C175-16 and C175-20 Generator Set Engines Oil Contains Fuel
3500 Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C175-16 and C175-20 Engines for Off-Highway Trucks Camshaft
C175-16 and C175-20 Generator Set Engines Crankcase Pressure Is High
C18 Marine and Marine Generator Set Engines Turbocharger
345D, 349D and 349D2 Excavators Hydraulic System Oil Makeup (Swing System)
2008/02/25 A New Oil Filter Group is Now Used on the TH48-E80 Oil/Gas Transmission {3030, 3067}
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Cushion Crossover) - Anti-Reaction Valves
2008/06/02 An Improved Alternator Belt Guard Is Now Used {7174}
345D, 349D and 349D2 Excavators Hydraulic System Solenoid Valve (Fine Swing) - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.