Camshaft
Show/hide table
图 1 | g01381231 |
(1) 左侧凸轮轴组件 (2) 右侧凸轮轴组件 |
(A) 新凸轮轴组件中止推垫圈的凹槽厚度 ... 8.75 ± 0.05 mm (0.344 ± 0.002 in)
(C) 定位销自凸轮轴组件的伸出长度 ... 12.0 ± 0.5 mm (0.47 ± 0.02 in)
(D) 新止推垫圈的厚度 ... 8.40 ± 0.05 mm (0.331 ± 0.002 in)
(E) 轴颈表面的尺寸
- 轴承轴颈的直径 ... 91.88 ± 0.02 mm (3.617 ± 0.001 in)
- 安装后的凸轮轴轴承孔孔径 ... 92.00 ± 0.06 mm (3.622 ± 0.002 in)
注: 新凸轮轴组件的轴向间隙为 0.15 至 0.35 mm (0.006 至 0.014 in)。
(3) 16 只螺栓的扭矩 ... 55 ± 7 N·m (41 ± 5 lb ft)
(F) 定位销自右后侧凸轮轴和左前侧凸轮轴端部的伸出长度 ... 22.0 ± 0.5 mm (0.87 ± 0.02 in)
Show/hide table
图 2 | g01447245 |
(B) 凸轮轴凸轮规定升程
- 进气凸轮 ... 13.2500 mm (0.52165 in)
- 喷油器凸轮 ... 13.8065 mm (0.54356 in)
- 排气凸轮 ... 13.2500 mm (0.52165 in)
- 喷油器凸轮 ... 13.8065 mm (0.54356 in)
按照以下步骤得出实际凸轮升程:
- 测量凸轮轴凸轮高度 (H) 。
- 测量基圆 (J) 。
- 从凸轮轴凸轮高度值 (H) 中减去基圆 (J) 。 二者之差就是实际凸轮轴凸轮升程。
Caterpillar Information System:
C18 Industrial Engines Monitoring System
793F and 793F XQ Off-Highway Truck Fast Fill Service System General Information
345D, 349D and 349D2 Excavators Hydraulic System Swing Hydraulic System
Repairing the Fuel Injector Rocker Arm{1102, 1123, 1290} Repairing the Fuel Injector Rocker Arm{1102, 1123, 1290}
2008/04/01 A New Valve Cover is Used {1100, 1120}
345D, 349D and 349D2 Excavators Hydraulic System Bucket Hydraulic System
345D, 349D and 349D2 Excavators Hydraulic System Control Valve (Stick Lowering)
345D, 349D and 349D2 Excavators Hydraulic System Stick Hydraulic System
C4.4 Industrial Engine Fuel Filter
345D, 349D and 349D2 Excavators Hydraulic System Control Valve (Boom Lowering) - If equipped
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Liquid Level Switch (Steering Tank)
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256} Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
C4.4 Industrial Engine Engine Rating Definitions
C4.4 Industrial Engine Engine Rating Conditions
3500B Locomotive Engines Configuration Parameters
C175-16 and C175-20 Generator Set Engines Oil Contains Fuel
3500 Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C175-16 and C175-20 Engines for Off-Highway Trucks Camshaft
C175-16 and C175-20 Generator Set Engines Crankcase Pressure Is High
C18 Marine and Marine Generator Set Engines Turbocharger
345D, 349D and 349D2 Excavators Hydraulic System Oil Makeup (Swing System)
2008/02/25 A New Oil Filter Group is Now Used on the TH48-E80 Oil/Gas Transmission {3030, 3067}
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Cushion Crossover) - Anti-Reaction Valves
2008/06/02 An Improved Alternator Belt Guard Is Now Used {7174}