New or Updated Drive Train Information Available In Guidelines For Reusable Parts{0374}
Usage:
Several Guidelines For Reusable Parts, containing new or revised reuse and/or salvage information, have been published recently. These Guidelines contain the latest technical information available from Caterpillar and reflect dealer input.
The chart contains form numbers, titles and print dates of the newest Guidelines.
Caterpillar Information System:
1987/12/21 New Gerotor Pump Group Used In 3161 Governors{1264}
1987/12/21 New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21 Check Screen Assembly In Fuel Transfer Pump Inlet If Low Fuel Pressure Is Experienced{1256}
1987/12/21 Improved VR3 Voltage Regulator Available For Earlier Generators{4474}
1987/12/14 Earlier Flywheel Housings Can Be Modified For Use With Later Crankshafts{1157,1202}
1987/12/14 New 1U5803 Connector Repair Kit Available{0785,0782}
1987/12/14 Improved Valve Mechanism Cover Groups{1107}
1987/12/14 Cooling System Troubleshooting Procedures For Generator Sets Equipped With Folded Core Radiators{1350}
1987/12/14 New Gaskets Used In Valve Mechanism Cover Group{1107,1120}
1987/12/14 New Linings Available For Flywheel Clutch Brake Shoe Assemblies{3058}
1987/11/30 Improved Starter Solenoid Prevents Contact Corrosion {1453}
1987/11/30 Engine Oil Refill Capacity Reduced {1318,1326}
1978/01/09 Improved Water Pump Group Now Used{1361}
1978/01/09 Service Tip: Use Caution When Hydraulically Operated Implements Must Be Lifted With A Hoist While The Engine Is Stopped{5050}
1978/01/09 Improved Seal Used Between Impeller And Bearings On Water Pump Shaft{1361,1371}
1978/01/09 5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09 Inner Member Of Caterpillar Coupling Must Be Restrained If The Connection To The Inner Member Is Removed{3252}
1978/01/09 Improved Water Shield For Exhaust Manifold{1067}
1978/01/16 Improved Front Pulley And Damper Groups Use New Damper Adapter With Larger Diameter Bolt Circle For Pulley Bolts{1205}
1978/01/16 Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16 New Turbine Housings Are The Replacement For Three Former Turbine Housings Used On Schwitzer Turbochargers{1052}
1978/01/16 Turbine Housing For Turbocharger Is Stronger{1052}
1978/01/16 Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/23 Design Of Governor Control Linkage Changed; Less Force Is Needed To Move The Accelerator Pedal{1265,1269}