Configuration Parameters
将会提高燃油效率和操作员方便性的用户指定参数可以被编程到电子控制模块(ECM)中。 有些参数可能影响发动机运行。 这可能引发操作人员对功率或性能的抱怨。 通过使用卡特彼勒电子维修工具,用户可以编程设置以下发动机相关参数来自定义发动机工况为具体的应用:
- "低怠速"
- "发动机额定值"
- "船只识别号"
- "发动机监测参数"
- "保养指示器模式"
- "客户指定密码"
- "发动机位置"
- "变速箱油设置点"
- "空燃比"
- "最高拖曳转速"
- "冷却液液位传感器 - 启用/禁用"
使用以下表格记录编制的技术规范。
"密码"
- "用户密码 #1" ____________________
- "用户密码 #2" ____________________
"ECM 参数"
- "船只识别号"____________________
"发动机/档位参数"
- "发动机位置(左舷、中位或右舷)" ____________________
- "低怠速转速" ____________________
- "最高拖曳转速" ____________________
- "燃油压力传感器 - 启用/禁用" ____________________
- "燃油温度传感器 - 启用/禁用" ____________________
- "冷却液液位传感器 - 启用/禁用" ____________________
- "变速箱润滑油温度传感器 - 启用/禁用" ____________________
- "变速箱润滑油压力传感器 - 启用/禁用" ____________________
- "同步发动机的数量" ____________________
- "第二油门 - 启用/禁用" ____________________
"保养参数"
"发动机机油容量"____________________
"发动机机油等级"____________________
"保养指示模式 - 启用/禁用,自动/手动燃油消耗量,自动/手动工作小时数" ____________________
"燃油修正系数 "____________________
"1级预防性保养周期" ____________________
"发动机监测参数"
- "发动机机油压力低 - 降功率" ____________________
- "发动机冷却液温度高 - 降功率、触发点" ____________________
- "发动机进气温度高 - 降功率、触发点、延迟时间" ____________________
- "冷却液液位低 - 警告/降功率、延迟时间" ____________________
- "燃油压力高 -延迟时间"
- "变速箱润滑油温度高 - 警告、触发点、延迟时间" ____________________
- "变速箱润滑油力高 - 警告、触发点、延迟时间" ____________________
用户指定参数可以按需经常改变。 密码保护的使用使用户可以改变参数。 确保保存一份参数记录在操作和保养手册里。 有关如何编程发动机以获得最佳性能和燃油经济性和详细说明,咨询您的卡特彼勒代理商。
Caterpillar Information System:
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091} Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091}
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Remove
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901} Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901}
G3500B Engines Water Temperature Regulator
C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
2008/02/11 The Wiring Harness for the Turbocharger Compressor Outlet Pressure Sensor has been Rerouted {1403, 1408, 1917}
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test
345D, 349D and 349D2 Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C15 On-Highway Engine Diesel Particulate Filter - Disassemble
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Speed - Check
C15 On-Highway Engine Diesel Particulate Filter - Assemble
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N} G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N}
2008/02/25 Improved Tube Assembly Is Now Used {1380, 3319}