Water Temperature Regulator
Show/hide table
Illustration 1 | g01454188 |
Start to open temperature ...
Fully open temperature ...
(A) Minimum opening distance at fully open temperature ...
Maximum opening time from closed position at
Maximum closing time from fully open position at
Caterpillar Information System:
C9 Marine Auxiliary and Generator Set Engines Configuration Parameters
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091} Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091}
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Remove
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
2008/02/11 The Wiring Harness for the Turbocharger Compressor Outlet Pressure Sensor has been Rerouted {1403, 1408, 1917}
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test
345D, 349D and 349D2 Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C15 On-Highway Engine Diesel Particulate Filter - Disassemble
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Speed - Check
C15 On-Highway Engine Diesel Particulate Filter - Assemble
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N} G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N}
2008/02/25 Improved Tube Assembly Is Now Used {1380, 3319}
C175-16 and C175-20 Generator Set Engines Configuration Parameters