Plate Locations and Film Locations
发动机序列号铭牌
Show/hide table
图 1 | g01347804 |
发动机序列号____________________
发动机型号____________________
配置总成号____________________
Show/hide table
图 2 | g01347806 |
C13 发动机左视图 C13 序列号铭牌位于缸体的左侧,燃油滤清器的右侧。 |
Show/hide table
图 3 | g01347807 |
C15 发动机左视图 C15 序列号铭牌位于缸体左侧的前边缘。 |
Caterpillar 发动机通过序列号和配置总成号来识别。 这些号码显示在发动机序列号铭牌和发动机信息标牌上。 Caterpillar 代理商需要这些号码以便确定该发动机上包括的部件。 这样可以准确识别替换零件的零件号。
发动机信息资料标牌
Show/hide table
图 4 | g01347963 |
发动机序列号____________________
发动机配置总成号____________________
发动机改装号____________________
发动机识别铭牌还包括其他有关发动机的重要信息。
Show/hide table
图 5 | g01347965 |
C13 发动机左视图 C13 信息铭牌位于气门室盖底座的左侧。 |
Show/hide table
图 6 | g01347964 |
C15 发动机左视图 C15 信息铭牌位于缸盖的左侧。 |
变速箱序列号
序列号用于识别变速箱。
为了便于快速查阅,请将识别号记录在插图下面的空白处。
TH31 变速箱序列号
Show/hide table
图 7 | g01451488 |
(1) 序列号铭牌 |
变速箱序列号____________________
OEM 信息____________________
TH35 变速箱序列号
Show/hide table
图 8 | g01451491 |
(1) 序列号铭牌 |
变速箱序列号____________________
OEM 信息____________________
Caterpillar Information System:
G3500B Engines Water Temperature Regulator
C9 Marine Auxiliary and Generator Set Engines Configuration Parameters
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091} Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091}
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Remove
2008/02/11 The Wiring Harness for the Turbocharger Compressor Outlet Pressure Sensor has been Rerouted {1403, 1408, 1917}
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test
345D, 349D and 349D2 Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C15 On-Highway Engine Diesel Particulate Filter - Disassemble
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Speed - Check
C15 On-Highway Engine Diesel Particulate Filter - Assemble
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N} G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N}
2008/02/25 Improved Tube Assembly Is Now Used {1380, 3319}
C175-16 and C175-20 Generator Set Engines Configuration Parameters
C11 and C13 Petroleum Engines Camshaft - Remove