2008/02/11 Caterpillar


The Wiring Harness for the Turbocharger Compressor Outlet Pressure Sensor has been Rerouted {1403, 1408, 1917}

Usage:

G3520C CWW
Generator Set:
G3516C (S/N: GZZ1-UP)
G3520C (S/N: GZK1-UP; GZM1-UP; GZN1-UP; RLP1-UP; LGS1-UP; CWW1-UP; CWY1-UP)

Description of Change: The wiring harness for the turbocharger compressor outlet pressure sensor has been relocated from the first stage of the aftercooler to the junction of the first stage and the second stage. This rerouting will help to prevent damage to the wiring from high temperatures.

Adaptable To: This change only applies to the above engines that have a turbocharger compressor outlet pressure sensor. Engines that have been built since 17December 2007 were built with the new routing.

Reroute the wiring harness for the turbocharger compressor outlet pressure sensor on engines with the serial numbers that are listed in Table 1.

Reroute the wiring harness along the aftercooler at the junction of the first stage and second stage. The four arrows in Illustration 1 show the new location for the wiring harness to be secured to the engine. Use the existing bolts and ladder clips in order to change the location of the wiring harness.




Illustration 1g01454384

Table 1
Model     Serial Number    
G3516C     S/N:GZZ00193    
G3516C     S/N:GZZ00196    
G3516C     S/N:GZZ00198    
G3516C     S/N:GZZ00200    
G3516C     S/N:GZZ00203    
G3516C     S/N:GZZ00207    
G3520C     S/N:GZK00183    
G3520C     S/N:GZM00143-00148    
G3520C     S/N:GZN00240    
G3520C     S/N:GZN00247-00248    
G3520C     S/N:GZN00272-00278    
G3520C     S/N:GZN00280    
G3520C     S/N:GZN00283    
G3520C     S/N:GZN00285    
G3520C     S/N:GZN00288    
G3520C     S/N:GZN00292-00293    
G3520C     S/N:GZN00296    
G3520C     S/N:GZN00298    
G3520C     S/N:GZN00301    
G3520C     S/N:GZN00304    
G3520C     S/N:GZN00307-00310    
G3520C     S/N:GZN00312    
G3520C     S/N:GZN00315    
G3520C     S/N:GZN00317    
G3520C     S/N:GZN00321-00322    
G3520C     S/N:GZN00324    
G3520C     S/N:GZN00326    
G3520C     S/N:GZN00329-00330    
G3520C     S/N:GZN00334-00336    
G3520C     S/N:GZN00338    
G3520C     S/N:GZN00340    
G3520C     S/N:GZN00342    
G3520C     S/N:GZN00344    
G3520C     S/N:GZN00346    
G3520C     S/N:GZN00348    
G3520C     S/N:GZN00350    
G3520C     S/N:GZN00353    
G3520C     S/N:GZN00355    
G3520C     S/N:GZN00357    
G3520C     S/N:GZN00360    
G3520C     S/N:GZN00362    
G3520C     S/N:GZN00364-00365    
G3520C     S/N:GZN00367    
G3520C     S/N:GZN00369-00378    
G3520C     S/N:GZN00381    
G3520C     S/N:GZN00383    
G3520C     S/N:GZN00409-00415    
G3520C     S/N:GZN00435-00437    
G3520C     S/N:GZN00439-00441    
G3520C     S/N:GZN00450    
G3520C     S/N:GZN00456-00474    
G3520C     S/N:RLP00150-00180    
G3520C     S/N:LGS00150-00152    
G3520C     S/N:CWW00261    
G3520C     S/N:CWY00201-00203    
G3520C     S/N:CWY00207    
G3520C     S/N:CWY00219-00221    

Caterpillar Information System:

C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
G3500B Engines Water Temperature Regulator
C9 Marine Auxiliary and Generator Set Engines Configuration Parameters
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091} Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091}
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test
345D, 349D and 349D2 Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
C11 and C13 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C15 On-Highway Engine Diesel Particulate Filter - Disassemble
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Speed - Check
C15 On-Highway Engine Diesel Particulate Filter - Assemble
345D, 349D and 349D2 Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N} G3508 "A" to G3508 with ADEM 3 ECM Upgrade for Enhanced Performance of 1400 RPM Engines{1000, 1052, 1270, 191N}
2008/02/25 Improved Tube Assembly Is Now Used {1380, 3319}
C175-16 and C175-20 Generator Set Engines Configuration Parameters
C11 and C13 Petroleum Engines Camshaft - Remove
C11 and C13 Petroleum Engines Camshaft - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.