Exhaust Manifold
Show/hide table
Illustration 1 | g01434438 |
(1) Cylinder head |
(2) Torque for the 12 taperlock studs ...
(3) Torque for the four taperlock studs ...
(4) Install the six gaskets with the tabs upward, as shown.
(5) Apply 4C-5599 Anti-Seize Compound to the bearing surfaces and the threads of the 12 locknuts before assembly.
Caterpillar Information System:
G3520C and G3520E Engines Air Lines - Compressor Bypass
345B Series II Excavator Machine System Specifications Travel Motor
3176C, 3406E and 3456 Industrial Engines Timing - Calibrate
3176C, 3406E and 3456 Industrial Engines Throttle Position Sensor - Calibrate
325D and 329D Excavators and 325D Material Handler Machine System Specifications Joystick Control
2008/01/28 A New Floating Aftercooler Core is Now Used {1063, 1380, 3319}
C15 and C18 Petroleum Generator Sets Product Description
2007/11/19 Improvements Made To Connectors For The EMCP3 Control Panel {4490}
C3.3 Industrial Engine Safety Messages
G3500B Engines Engine Oil Filter - Duplex
320D and 323D Excavators Machine System Specifications Joystick Control
C9 Petroleum Engines Water Temperature Regulator - Remove and Install
C15 and C18 Petroleum Generator Sets Fuel System - Prime
C18 Petroleum Generator Sets Fuel System - Prime
C9 Petroleum Engines Flywheel - Remove and Install
C15 and C18 Petroleum Generator Sets Overhaul (Major)
C15 and C18 Petroleum Generator Sets Overhaul (Top End)
C9 Petroleum Engines Flywheel Housing - Remove and Install
3176C, 3406E and 3456 Industrial Engines Electronic Service Tool Does Not Communicate
3176C, 3406E and 3456 Industrial Engines Indicator Lamp - Test
C13, C15, and C18 Tier 4 Final Engines Air Lines
3176C, 3406E and 3456 Industrial Engines Coolant Level - Test
C4.4 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
3176C, 3406E and 3456 Industrial Engines Engine Overspeeds