Ensure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the warning signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the warning signs. The warning signs that are loosened could drop off of the engine.
Replace any warning sign that is damaged or missing. If a warning sign is attached to a part of the engine that is replaced, install a new warning sign on the replacement part. Your Caterpillar dealer or your distributor can provide new warning signs.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death. |
Illustration 1 | g01154807 |
Typical example |
The Universal Warning label (2) is located on the rear end of the inlet manifold cover. Refer to illustration 2.
Illustration 2 | g01431463 |
(1) Ether Warning Label
(2) Universal warning |
Do not use aerosol types of starting aids such as ether. Such use could result in an explosion and personal injury. |
Illustration 3 | g01154809 |
Typical example |
The ether warning label (1) is located on the front end of the inlet manifold cover. Refer to illustration 2.