Water Pump - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position water pump (3) on the engine block. Install bolts (6).
- Install the gasket, elbow assembly (5), and bolts (4).
- Connect hose (2).
- Tighten hose clamps (1) to a torque of
7 ± 1 N·m (62 ± 9 lb in) . - Install the belt. Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace".
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
Illustration 1 | g01151111 |
Caterpillar Information System:
2007/11/19 The Air Filter Element Assembly is Updated {1051, 1054}
3406C Marine Auxiliary Generator Set Zinc Rods - Inspect/Replace
C9 Petroleum Engines Water Pump - Remove
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Install
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Remove
C15 and C18 Petroleum Generator Sets Product Lifting
C9 Petroleum Engines Engine Oil Pump - Install
C32 Petroleum Generator Sets Fuel System - Prime
C9 Petroleum Engines Engine Oil Pump - Remove
C13 and C15 On-highway Engines Air System Verification Test
G3500B Engines Vibration Damper Guard
G3500 Engines Vibration Damper Guard
C18 Petroleum Generator Sets Plate Locations and Film Locations
C15 and C18 Petroleum Generator Sets Plate Locations and Film Locations
C9 Petroleum Engines Water Temperature Regulator - Remove and Install
320D and 323D Excavators Machine System Specifications Joystick Control
G3500B Engines Engine Oil Filter - Duplex
C3.3 Industrial Engine Safety Messages
2007/11/19 Improvements Made To Connectors For The EMCP3 Control Panel {4490}
C15 and C18 Petroleum Generator Sets Product Description
2008/01/28 A New Floating Aftercooler Core is Now Used {1063, 1380, 3319}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Joystick Control
3176C, 3406E and 3456 Industrial Engines Throttle Position Sensor - Calibrate
3176C, 3406E and 3456 Industrial Engines Timing - Calibrate