Engine Oil Pump - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (4).
- Remove bolt (3).
- Remove bolts (2) and remove engine oil pump (1).
- Remove the O-ring seal that is located between the cylinder block and the outlet elbow.
Show/hide table
Illustration 2 g01172397 - Remove bolts (7), outlet elbow (8), and the O-ring seal.
- Remove bolts (5). Remove oil pickup tube (6) and the gasket.
Show/hide table
Illustration 3 g01172401 - Remove bolt (12) and the washer. Remove idler gear (11). Use Tooling (A) in order to remove bearing (10) from idler gear (11). Remove shaft (9) from engine oil pump (1).
Show/hide table
Illustration 1 | g01172390 |
Caterpillar Information System:
C13 and C15 On-highway Engines Air System Verification Test
G3500B Engines Vibration Damper Guard
G3500 Engines Vibration Damper Guard
2008/08/01 An Improved Stud Is Now Used on High Pressure Turbochargers {1059}
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Install
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Remove
C9 Petroleum Engines Engine Oil Pump - Assemble
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Assemble
320D Excavator System Pressure Release
C9 Petroleum Engines Engine Oil Pump - Disassemble
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Disassemble
C15 and C18 Petrolem Generator Set Engines Engine Top Speed Is Not Obtained
C32 Petroleum Generator Sets Fuel System - Prime
C9 Petroleum Engines Engine Oil Pump - Install
C15 and C18 Petroleum Generator Sets Product Lifting
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Remove
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Install
C9 Petroleum Engines Water Pump - Remove
3406C Marine Auxiliary Generator Set Zinc Rods - Inspect/Replace
2007/11/19 The Air Filter Element Assembly is Updated {1051, 1054}
C9 Petroleum Engines Water Pump - Install
C18 Petroleum Generator Sets Plate Locations and Film Locations
C15 and C18 Petroleum Generator Sets Plate Locations and Film Locations
C9 Petroleum Engines Water Temperature Regulator - Remove and Install