Engine Oil Pump - Assemble
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that all of the parts of the engine oil pump are thoroughly clean prior to assembly.
Note: Lubricate all internal parts of the engine oil pump with clean engine oil.
Show/hide tableIllustration 1 g01433243 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install oil pressure relief plunger (7) and spring (8) in oil pump body assembly (2). Install oil plug (9).
Show/hide table
Illustration 2 g01433241 - Install shaft assembly (6) in oil pump body assembly (2).
- Install shaft assembly (3) in oil pump body (4).
- Position oil pump body (4) on oil pump body assembly (2) and install bolts (5).
Show/hide table
Illustration 3 g01433238 - Use a suitable press in order to install drive gear (1) on the shaft assembly of oil pump body assembly (2) until drive gear (1) is flush with the end of the shaft assembly.
End By:
- Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Assemble
320D Excavator System Pressure Release
C9 Petroleum Engines Engine Oil Pump - Disassemble
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Disassemble
C15 and C18 Petrolem Generator Set Engines Engine Top Speed Is Not Obtained
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Install
3176C Engine for Caterpillar Built Machines Diagnostic Capabilities
C15 and C18 Petrolem Generator Set Engines Engine Monitoring System
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Remove
3176C, 3406E and 3456 Industrial Engines ECM/Personality Module - Test
C9 Petroleum Engines Engine Oil Filter Base and Oil Cooler - Install
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Remove
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Install
2008/08/01 An Improved Stud Is Now Used on High Pressure Turbochargers {1059}
G3500 Engines Vibration Damper Guard
G3500B Engines Vibration Damper Guard
C13 and C15 On-highway Engines Air System Verification Test
C9 Petroleum Engines Engine Oil Pump - Remove
C32 Petroleum Generator Sets Fuel System - Prime
C9 Petroleum Engines Engine Oil Pump - Install
C15 and C18 Petroleum Generator Sets Product Lifting
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Remove
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Install