Engine Oil Filter Base and Oil Cooler - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the gasket and engine oil cooler (5).
Show/hide table
Illustration 2 g01271362 Show/hide table
Illustration 3 g01104432 - Apply clean engine oil to the oil seal. Install the oil seal in engine oil filter base (3). Position engine oil filter base (3) over the engine oil cooler. Install bolts (4). Tighten the bolts in a numerical sequence. Tighten the bolts again in a numerical sequence. Connect hose assembly (2).
Show/hide table
Illustration 4 g01171123 - Install engine oil filter (1).
- Fill the engine with coolant to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
| |
| Illustration 1 | g01150963 |
Caterpillar Information System:
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Install
C9 Petroleum Engines Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Petroleum Generator Sets Self-Diagnostics
C9 Petroleum Engines Electronic Unit Injector Sleeve - Install
3176C, 3406E and 3456 Industrial Engines Event Codes
3406E and C15 Marine Engines Circuit Breakers
3176C, 3406E and 3456 Industrial Engines Diagnostic Trouble Codes
C9 Petroleum Engines Electronic Unit Injector - Install
C9 Petroleum Engines Electronic Unit Injector - Remove
C9 Petroleum Engines Electronic Unit Injector Sleeve - Remove
3176C, 3406E and 3456 Industrial Engines ECM/Personality Module - Test
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Remove
C15 and C18 Petrolem Generator Set Engines Engine Monitoring System
3176C Engine for Caterpillar Built Machines Diagnostic Capabilities
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Install
C15 and C18 Petrolem Generator Set Engines Engine Top Speed Is Not Obtained
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Disassemble
C9 Petroleum Engines Engine Oil Pump - Disassemble
320D Excavator System Pressure Release
797F Off-Highway Truck Power Train Modulating Valve (Transmission Clutch Engaging) - Assemble
C9 Petroleum Engines Engine Oil Pump - Assemble
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Remove