D6K2 Track-Type Tractor Machine Systems Caterpillar


Hydraulic Tank - Assemble

Usage:

D6K2 6S6

Assembly Procedure

Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite 536 


Illustration 1g06207325


Illustration 2g06207332
Install the O-ring seal. Finger-tighten the breather assembly to compress the O-ring seal.


Illustration 3g06207365
If removed, install the fitting and the O-ring seal. Tighten the fitting to a torque of 140 ± 10 N·m (103 ± 7 lb ft).


Illustration 4g06207363
Install the O-ring seals.


Illustration 5g06207373


Illustration 6g06207384
If removed, install the tubes, the connectors, and the plates on the suction screens.


Illustration 7g06207389
Install the O-ring seal for the drain plug.

End By:

  1. Install the hydraulic tank.

Caterpillar Information System:

Installing Master Track Bolts on Certain D10N, D10R, and D10T Track-Type Tractors {4170} Installing Master Track Bolts on Certain D10N, D10R, and D10T Track-Type Tractors {4170}
D6K Track-Type Tractor Hydraulic Tank Breather - Replace
A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 and C18 Tier 4 Track Type Tractor Engines {1061, 1087, 108C, 1380} A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 and C18 Tier 4 Track Type Tractor Engines {1061, 1087, 108C, 1380}
D6K Track-Type Tractor Window Washer Reservoir - Fill
C32 Marine Auxiliary Engine Maintenance Interval Schedule
992K Wheel Loader Oil Filter (Steering, Brake Cooler)
992K Wheel Loader Gear Pump (Steering, Brake Oil Cooler)
992K Wheel Loader General Information (Steering System)
D6K Track-Type Tractor Window Wipers - Inspect/Replace
992K Wheel Loader Electronic Control (Brake System)
D6K Track-Type Tractor Track Roller Frame - Inspect
992G Wheel Loader Machine Systems Bucket - Install
New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268} New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268}
C7.1 Engines Crankcase Fumes Disposal Tube Has Oil Draining
992K Wheel Loader Electronic Control (Hydraulic System)
An Improved Design for Equalizer Bar Center Pin and Retaining Plate Is Now Used on Certain 953C, 953D, and 953K Track-Type Loaders {7206} An Improved Design for Equalizer Bar Center Pin and Retaining Plate Is Now Used on Certain 953C, 953D, and 953K Track-Type Loaders {7206}
992K Wheel Loader Fan Hydraulic System
New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620} New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620}
992K Wheel Loader Oil Filter (Hydraulic)
An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278} An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278}
992K Wheel Loader Hydraulic System
Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439} Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439}
854K Wheel Dozer General Information (Hydraulic System)
New Bracket for Tilt Cylinder Hose Is Now Available on Certain 988K Large Wheel Loaders {5057, 5104} New Bracket for Tilt Cylinder Hose Is Now Available on Certain 988K Large Wheel Loaders {5057, 5104}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.