New Bracket for Tilt Cylinder Hose Is Now Available on Certain 988K Large Wheel Loaders {5057, 5104}
- Wheel Loader
- 988K (S/N: LWX1-808; TWX1-1581)
Description Of Change: New bracket for tilt cylinder hose is now available on the machines listed above. The new bracket is designed to locate the tilt cylinder hose assembly accurately to the tilt cylinder. This ensures proper orientation of hose coupling relative to the tilt cylinder and eliminates downtime and repair.
Adaptable To: New bracket for tilt cylinder hose is adaptable to the products within the listed serial numbers, and is effective with all products after the listed serial numbers.
Show/hide table
| Part List | |||
|---|---|---|---|
| Item | Qty | Part Number | |
| 1 | 1 | 524-2063 Bracket | |
Show/hide table
| |
| Illustration 1 | g06209363 |
|
(A) (B) (1) | |
Secure the tilt cylinder hose using bracket (1) to the tilt cylinder using four bolts (A) and four hard washers (B) as shown in Illustration 1.
Caterpillar Information System:
854K Wheel Dozer General Information (Hydraulic System)
Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439} Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439}
992K Wheel Loader Hydraulic System
An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278} An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278}
992K Wheel Loader Oil Filter (Hydraulic)
New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620} New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620}
992K Wheel Loader Fan Hydraulic System
An Improved Design for Equalizer Bar Center Pin and Retaining Plate Is Now Used on Certain 953C, 953D, and 953K Track-Type Loaders {7206} An Improved Design for Equalizer Bar Center Pin and Retaining Plate Is Now Used on Certain 953C, 953D, and 953K Track-Type Loaders {7206}
992K Wheel Loader Electronic Control (Hydraulic System)
C7.1 Engines Crankcase Fumes Disposal Tube Has Oil Draining
New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268} New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268}
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290} Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Fuel System Cleanliness on Certain C4.2, C4.4, C6.4, and C6.6 Engines {1250, 1261, 1290} Fuel System Cleanliness on Certain C4.2, C4.4, C6.4, and C6.6 Engines {1250, 1261, 1290}
D6N Track-Type Tractor Blades (Flexxaire Fan) - Inspect
D6K2 Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
336 and 336 GC Excavator Additional Messages
D6K2 Track-Type Tractor Machine Systems Piston Pump (Winch) - Remove and Install
Bench Test Procedure for 966K XE Wheel Loader Transmission {3030, 3073} Bench Test Procedure for 966K XE Wheel Loader Transmission {3030, 3073}
336 and 336 GC Excavator Fire Extinguisher Location
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063} An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
Improved Transmission Drive Shaft Now Used on AD55B and AD60 Underground Articulated Trucks {3030} Improved Transmission Drive Shaft Now Used on AD55B and AD60 Underground Articulated Trucks {3030}
New Procedure to Prevent the Product Link Elite Hybrid Assets From De-registering is Now Available For Certain Wheel Loaders {7606, 7620} New Procedure to Prevent the Product Link Elite Hybrid Assets From De-registering is Now Available For Certain Wheel Loaders {7606, 7620}
336 and 336 GC Excavator Specifications