An Improved Design for Equalizer Bar Center Pin and Retaining Plate Is Now Used on Certain 953C, 953D, and 953K Track-Type Loaders {7206}
- Track-Type Loader
- 953C (S/N: BBX1-1582,2000-3115)
- 953D (S/N: LBP1-2212)
- 953K (S/N: LJT1-103)
- 953D (S/N: LBP1-2212)
Reference: Refer to Special Instruction , M0082617 , "Procedure To Install Equalizer Bar Retaining Pin and Plates on Certain 953 Track-Type Loaders"
Description Of Change: An improved design for equalizer bar center pin and retaining plate is now used on the above listed machines. The new improved design provides an increased service life for the equalizer bar pin retaining plate.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all machines after the listed serial numbers.
Show/hide table
| |
| Illustration 1 | g06210208 |
|
Equalizer bar group (1) (2) (3) (4) (5) (6) (7) | |
Show/hide table
| New Parts List | |||
|---|---|---|---|
| Item | Qty | Part Number | Description |
| 1 | 1 | 519-9702 | Pin |
| 2 | 1 | 519-9701 | Plate |
| 3 | 1 | 520-0574 | Spacer |
| 4 | 2 | 9X-8257 | Washer |
| 5 | 2 | 290-7515 | Bolt |
| 6 | 1 | 8T-5878 | Bolt |
| 7 | 1 | 267-3507 | Hard Washer |
Caterpillar Information System:
992K Wheel Loader Electronic Control (Hydraulic System)
C7.1 Engines Crankcase Fumes Disposal Tube Has Oil Draining
New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268} New Rear Axle Trunnion Support Now Used on Certain 950 GC Medium Wheel Loaders {3268}
D6K2 Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
Installing Master Track Bolts on Certain D10N, D10R, and D10T Track-Type Tractors {4170} Installing Master Track Bolts on Certain D10N, D10R, and D10T Track-Type Tractors {4170}
D6K Track-Type Tractor Hydraulic Tank Breather - Replace
A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 and C18 Tier 4 Track Type Tractor Engines {1061, 1087, 108C, 1380} A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 and C18 Tier 4 Track Type Tractor Engines {1061, 1087, 108C, 1380}
D6K Track-Type Tractor Window Washer Reservoir - Fill
C32 Marine Auxiliary Engine Maintenance Interval Schedule
992K Wheel Loader Oil Filter (Steering, Brake Cooler)
992K Wheel Loader Gear Pump (Steering, Brake Oil Cooler)
992K Wheel Loader General Information (Steering System)
992K Wheel Loader Fan Hydraulic System
New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620} New Software Is Used for Certain L-Series and M-Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {7606, 7620}
992K Wheel Loader Oil Filter (Hydraulic)
An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278} An Improved Axle Pressure Relief Fitting is Now Used on All 924K, 926M, 930K, and 930M Small Wheel Loaders {3260, 3278}
992K Wheel Loader Hydraulic System
Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439} Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439}
854K Wheel Dozer General Information (Hydraulic System)
New Bracket for Tilt Cylinder Hose Is Now Available on Certain 988K Large Wheel Loaders {5057, 5104} New Bracket for Tilt Cylinder Hose Is Now Available on Certain 988K Large Wheel Loaders {5057, 5104}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290} Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Fuel System Cleanliness on Certain C4.2, C4.4, C6.4, and C6.6 Engines {1250, 1261, 1290} Fuel System Cleanliness on Certain C4.2, C4.4, C6.4, and C6.6 Engines {1250, 1261, 1290}
D6N Track-Type Tractor Blades (Flexxaire Fan) - Inspect
D6K2 Track-Type Tractor Machine Systems Fuel Tank - Remove and Install