Connectors at the Terminal Boxes
Terminal Box and Connectors for the Master ECM
 | |
| Illustration 1 | g01577254 |
Connectors at the terminal box for the master ECM (left side engine view) (H1) Left side ignition harness (J1/P1 and J2/P2) ECM connectors for the master ECM (J5/P5) Customer connectors (J6/P6) Connectors for the detonation sensors (left side) (J7/P7) Connectors for the control harness (right side of terminal box) (J8/P8) Connectors for the control harness (left side of terminal box) (P9) Service tool connector (J10) Connector for the harness to the advisor monitor display (P50) Timing calibration connector | |
P5 Customer Connector
 | |
| Illustration 2 | g01411148 |
J6/P6 Connectors for the Detonation Sensors (Left Side)
 | |
| Illustration 3 | g01411150 |
J7/P7 Connectors for the Control Harness (right side of terminal box)
 | |
| Illustration 4 | g01411321 |
J8/P8 Connectors for the Control Harness (left side of terminal box)
 | |
| Illustration 5 | g01411322 |
P9 Connector for the Service Tool Connector
 | |
| Illustration 6 | g01411323 |
P10 Connectors for the Advisor Monitor Display
 | |
| Illustration 7 | g01411324 |
P50 Timing Calibration Connector
 | |
| Illustration 8 | g01155187 |
Terminal Box for the Slave ECM
 | |
| Illustration 9 | g01577294 |
Connectors at the terminal box for the slave ECM (right side engine view) (H2) Right side ignition harness (J3/P3 and J4/P4) ECM connectors for the slave ECM (J11/P11) Connectors for the Control Harness (J12/P12) Connectors for the Detonation Sensors | |
J11/P11 Connectors for the Control Harness
 | |
| Illustration 10 | g01436446 |
J12/P12 Connectors for the Detonation Sensors (Right Side)
 | |
| Illustration 11 | g01436447 |
Harness Connectors
Harness Connector at the Compressor Bypass Actuator
 | |
| Illustration 12 | g01411816 |
Harness Connector for the Fuel Metering Valve
 | |
| Illustration 13 | g01436453 |
Harness Connector at the Throttle Actuator
| | |
| Illustration 14 | g01411816 |
Harness Connector at the Integrated Temperature Sensing Module
 | |
| Illustration 15 | g01436448 |
Harness Connector for the Exhaust Temperature Sensors at the Integrated Temperature Sensing Module
 | |
| Illustration 16 | g01436452 |
Sensor Connectors
Analog sensor connector (active)
 | |
| Illustration 17 | g01159881 |
Analog sensor connector (passive)
 | |
| Illustration 18 | g01436505 |
Sensor Connectors for PWM Sensors
 | |
| Illustration 19 | g01414254 |
 | |
| Illustration 20 | g01240891 |
Connectors for the Termination Resistor
 | |
| Illustration 21 | g01436457 |
Junction Box
 | |
| Illustration 22 | g01411745 |
Terminal locations at the junction box (left side engine view) (1) 20 amp fuse (2) 15 amp fuses (3) 6 amp fuses (4) Terminal strip connections | |