Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802}
- Underground Articulated Truck
- AD45B (S/N: CXM1-UP; GXM1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Field service reports indicate that the air conditioner compressor mount may crack.
Solution
Caterpillar is aware of the problem, but an interim repair has not yet been defined.
Inspect the air conditioner compressor mount for cracking. Repair or replace a cracked air conditioner compressor mount with the same part.
Follow the instruction below if you have experienced cracking of the air conditioner compressor mount.
- Submit a Service Information Management System (SIMS) report. Attach photos of the cracked air conditioner compressor mount to the SIMS report.
- Submit a Dealer Solution Network (DSN) ticket quoting CPI number 374650
- Request that the Tier 1 representative, transfer your ticket to an available Tier 2 representative for Caterpillar Underground Mining - Base Machine. The Tier 2 representative will request the machine serial number and machine operating hours.
Show/hide table
Illustration 1 | g06109094 |
|
Caterpillar Information System:
D6T XE Electrical & Hydraulic Troubleshooting Current Sensor - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
953K Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Assemble
D7E Track-Type Tractor Current Sensor - Test
854K Wheel Dozer Declaration of Conformity
992K Wheel Loader Declaration of Conformity
390F Excavator Machine System Final Drive and Motor Fastener (Mounting)
910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
953K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Lubrication
340F Excavator Machine Systems Boom Lines
C1.7 and C2.2 Industrial Engines Cylinder Head - Inspect
C1.7 and C2.2 Industrial Engines Engine Valve Lash - Inspect/Adjust
C1.7 and C2.2 Industrial Engines General Information
C1.7 and C2.2 Industrial Engines Electronic Control System Components
Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408} Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408}
Installing the Conversion Harness for non-Cat Hydromechanical (Complex) Work Tools {1408} Installing the Conversion Harness for non-Cat Hydromechanical (Complex) Work Tools {1408}
D6T Track Type Tractor Power Train Torque Converter - Disassemble
3516E Engines for Caterpillar Built Machines Turbocharger - Remove and Install
A New Film Is Now Used for Diesel Exhaust Fluid (DEF) Filling Guidance on Certain M Series Medium Wheel Loaders {108K, 7405} A New Film Is Now Used for Diesel Exhaust Fluid (DEF) Filling Guidance on Certain M Series Medium Wheel Loaders {108K, 7405}
966M and 972M Wheel Loaders Automatic Lubrication Filler Filter - Clean - Automatic TWIN Greasing System - If Equipped
986H Wheel Loader Machine Systems Hydraulic Tank - Disassemble