Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3940 | Bracket As | 2 |
- Use two people to position radiator (15). The weight of radiator (15) is approximately
41 kg (90 lb) . - Position aftercooler (12). The weight of aftercooler (12). The weight of aftercooler (12) is approximately
18 kg (40 lb) . - Use two people to position oil cooler (11). The weight of oil cooler (11) is approximately
29 kg (65 lb) . - Install plate assembly (14) and bolts (13)
Show/hide table
Illustration 2 g06108942 - Install bolts (10).
Show/hide table
Illustration 3 g06108940 - Install bolts (9).
Show/hide table
Illustration 4 g06108934 - Attach Tooling (A) and a suitable lifting device to cooling assembly (7). The weight of cooling assembly (7) is approximately
88 kg (194 lb) .Show/hide table
Illustration 5 g06108910 - Install bolts (8) into cooling assembly (7).
Show/hide table
Illustration 6 g06108810 - Install brackets (6) and bolts (5).
Show/hide table
Illustration 7 g06108783 - Install grill (4) and bolts (3).
Show/hide table
Illustration 8 g06108772 - Install shroud assembly (2) and bolts (1).
Show/hide table
| |
| Illustration 1 | g06108944 |
End By:
- Install cooling package (radiator, aftercooler, oil cooler)
Caterpillar Information System:
D7E Track-Type Tractor Current Sensor - Test
854K Wheel Dozer Declaration of Conformity
992K Wheel Loader Declaration of Conformity
390F Excavator Machine System Final Drive and Motor Fastener (Mounting)
910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
953K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Lubrication
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
390F Excavator Machine System Front Idler
C4.4 and C6.6 Engines Coolant Level Is Low
340F Excavator Machine Systems Boom Lines
953K Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
D6T XE Electrical & Hydraulic Troubleshooting Current Sensor - Test
Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802} Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802}
340F Excavator Machine Systems Boom Lines
C1.7 and C2.2 Industrial Engines Cylinder Head - Inspect
C1.7 and C2.2 Industrial Engines Engine Valve Lash - Inspect/Adjust
C1.7 and C2.2 Industrial Engines General Information
C1.7 and C2.2 Industrial Engines Electronic Control System Components
Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408} Installing the Conversion Harness for Non-Cat Hydromechanical (Simple) Work Tools {1408}
Installing the Conversion Harness for non-Cat Hydromechanical (Complex) Work Tools {1408} Installing the Conversion Harness for non-Cat Hydromechanical (Complex) Work Tools {1408}
D6T Track Type Tractor Power Train Torque Converter - Disassemble