Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3940 | Bracket As | 2 |
Start By:
- Remove the cooling system package (radiator, aftercooler, oil cooler).
- Remove bolts (1) and shroud assembly (2).
Show/hide table
Illustration 2 g06108783 - Remove bolts (3) and grill (4).
Show/hide table
Illustration 3 g06108810 - Remove bolts (5) and brackets (6).
Show/hide table
Illustration 4 g06108934 - Attach Tooling (A) and a suitable lifting device to cooling assembly (7). The weight of cooling assembly (7) is approximately
88 kg (194 lb) .Show/hide table
Illustration 5 g06108910 - Remove bolts (8) from cooling assembly (7). Remove cooling assembly (7).
Show/hide table
Illustration 6 g06108940 - Remove bolts (9).
Show/hide table
Illustration 7 g06108942 - Remove bolts (10).
Show/hide table
Illustration 8 g06108944 - Remove bolts (13) and plate assembly (14).
- Use two people to remove oil cooler (11). The weight for oil cooler (11) is approximately
29 kg (64 lb) . - Remove aftercooler (12). The weight of aftercooler (12) is approximately
18 kg (40 lb) . - Use two people to remove radiator (15). The weight of radiator (15) is approximately
41 kg (90 lb) .
Show/hide table
| |
| Illustration 1 | g06108772 |
Caterpillar Information System:
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Lubrication
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
390F Excavator Machine System Front Idler
C4.4 and C6.6 Engines Coolant Level Is Low
340F Excavator Machine Systems Boom Lines
C4.4 and C6.6 Engines System Overview
C4.4 and C6.6 Engines Injector Code - Calibrate
C4.4 and C6.6 Engines Electrical Connectors - Inspect
AD22 Underground Articulated Truck Engine Shutdown Switch
950 GC Wheel Loader Hydraulic System Main Control Valve
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Exhaust System Contains Oil
A Procedure Is Now Available To Repair Cracks At The Weld Between The Frame And The Casting That Mounts The Pivot Shaft And Final Drive On Certain D6T Track-Type Tractors {7051} A Procedure Is Now Available To Repair Cracks At The Weld Between The Frame And The Casting That Mounts The Pivot Shaft And Final Drive On Certain D6T Track-Type Tractors {7051}
953K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
390F Excavator Machine System Final Drive and Motor Fastener (Mounting)
992K Wheel Loader Declaration of Conformity
854K Wheel Dozer Declaration of Conformity
D7E Track-Type Tractor Current Sensor - Test
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Assemble
953K Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
D6T XE Electrical & Hydraulic Troubleshooting Current Sensor - Test
Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802} Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802}
340F Excavator Machine Systems Boom Lines