390F Excavator Machine System Caterpillar


Final Drive and Motor Fastener (Mounting)

Usage:

390F FEH


Illustration 1g06108832

Table 1
Specification for 353-0573 Mounting and Final Drive Gp 
Item  Qty  Part  Specification Description 
48  461-3892 Bolt  Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize compound to the threads.
Use the following tightening procedure:
1. Tighten bolts to 500 ± 50 N·m (369 ± 37 lb ft.)
2. Turn to an additional angle of 50 ± 5 degrees. 

Caterpillar Information System:

910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
953K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Lubrication
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
390F Excavator Machine System Front Idler
C4.4 and C6.6 Engines Coolant Level Is Low
340F Excavator Machine Systems Boom Lines
C4.4 and C6.6 Engines System Overview
C4.4 and C6.6 Engines Injector Code - Calibrate
C4.4 and C6.6 Engines Electrical Connectors - Inspect
AD22 Underground Articulated Truck Engine Shutdown Switch
992K Wheel Loader Declaration of Conformity
854K Wheel Dozer Declaration of Conformity
D7E Track-Type Tractor Current Sensor - Test
D5R and D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Assemble
953K Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
D6T XE Electrical & Hydraulic Troubleshooting Current Sensor - Test
Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802} Check the Air Conditioner Compressor Mount on AD45B Underground Articulated Trucks {1802}
340F Excavator Machine Systems Boom Lines
C1.7 and C2.2 Industrial Engines Cylinder Head - Inspect
C1.7 and C2.2 Industrial Engines Engine Valve Lash - Inspect/Adjust
C1.7 and C2.2 Industrial Engines General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.