C4.4 and C6.6 Engines Caterpillar


Component Location

Usage:

C4.4 448

Electronic Control Circuit Diagram



Illustration 1g02476570
Electronic control circuit diagram for a typical C4.4 engine


Illustration 2g02476572
Electronic control circuit diagram for a typical C6.6 engine

Table 1
Components That May Be Only Applicable For Certain Applications 
Speed Control Input  Cooling Fan Solenoid 
Ambient Air Temperature Sensor  Engine Fan Reversing Solenoid 
Coolant Level Sensor  Air Filter Restriction Pressure Sensor 
Ether Solenoid   

Typical C4.4 Engine



Illustration 3g06098746
Sensor locations on the left side of a typical C4.4 engine
(1) Intake manifold air temperature sensor
(2) Intake manifold pressure sensor
(3) Water-in-fuel switch
(4) Electronic Control Module (ECM)
(5) Barometric pressure sensor
(6) Primary speed/timing sensor
(7) Oil pressure sensor
(8) Fuel temperature sensor
(9) Solenoid for the high-pressure fuel pump
(10) Coolant temperature sensor
(11) Fuel rail pressure sensor


Illustration 4g06098840
Close up views of sensor locations on the left side of a typical C4.4 engine
(1) Intake manifold air temperature sensor
(2) Intake manifold pressure sensor
(3) Water-in-fuel switch
(4) Electronic Control Module (ECM)
(5) Barometric pressure sensor
(6) Primary speed/timing sensor
(7) Oil pressure sensor
(8) Fuel temperature sensor
(9) Solenoid for the high-pressure fuel pump
(10) Coolant temperature sensor
(11) Fuel rail pressure sensor


Illustration 5g06099155
Sensor locations on the right side and top of a typical C4.4 engine
(12) NOx Reduction System (NRS) temperature sensor
(13) NRS valve including a position sensor
(14) NRS outlet pressure sensor
(15) NRS inlet pressure sensor
(16) Wastegate regulator
(17) Secondary speed/timing sensor (not shown)
(18) Exhaust Back Pressure Regulator (EBPR)


Illustration 6g06099179
Sensor locations on the right side and top of a typical C4.4 engine
(12) NOx Reduction System (NRS) temperature sensor (not shown)
(13) NRS valve including a position sensor
(14) NRS outlet pressure sensor
(15) NRS inlet pressure sensor
(16) Wastegate regulator
(17) Secondary speed/timing sensor (not shown)
(18) Exhaust Back Pressure Regulator (EBPR)

Typical C6.6 Engine



Illustration 7g06099223
Sensor locations on the left side of a typical C6.6 engine
(1) Fuel rail pressure sensor (not shown)
(2) Intake manifold pressure sensor
(3) Intake manifold air temperature sensor
(4) Electronic Control Module (ECM)
(5) Barometric pressure sensor (not shown)
(6) Primary speed/timing sensor
(7) Oil pressure sensor
(8) Water-in-fuel switch
(9) Fuel temperature sensor
(10) Solenoid for the high-pressure fuel pump
(11) Coolant temperature sensor


Illustration 8g06099261
Close up views of sensor locations on the left side of a typical C6.6 engine
(1) Fuel rail pressure sensor
(2) Intake manifold pressure sensor
(3) Intake manifold air temperature sensor
(4) Electronic Control Module (ECM)
(5) Barometric pressure sensor
(6) Primary speed/timing sensor
(7) Oil pressure sensor
(8) Water-in-fuel switch
(9) Fuel temperature sensor
(10) Solenoid for the high-pressure fuel pump
(11) Coolant temperature sensor


Illustration 9g06099277
Sensor locations on the right side and top of a typical C6.6 engine
(12) NOx Reduction System (NRS) outlet pressure sensor
(13) NRS inlet pressure sensor
(14) NRS temperature sensor
(15) NRS valve including a position sensor
(16) Wastegate regulator
(17) Exhaust Back Pressure Regulator (EBPR)
(18) Secondary speed/timing sensor


Illustration 10g06099297
Sensor locations on the right side and top of a typical C6.6 engine
(12) NOx Reduction System (NRS) outlet pressure sensor
(13) NRS inlet pressure sensor
(14) NRS temperature sensor
(15) NRS valve including a position sensor
(16) Wastegate regulator
(17) Exhaust Back Pressure Regulator (EBPR)
(18) Secondary speed/timing sensor (not shown)

Typical Clean Emissions Module (CEM)



Illustration 11g06099332
Sensors and components on a typical Clean Emissions Module (CEM)
(1) Probe for the DOC inlet temperature sensor
(2) DOC inlet temperature sensor
(3) Aftertreatment ID module
(4) Soot antennas

Caterpillar Information System:

973K Track Type Loader Operator Controls
C4.4 and C6.6 Engines Welding Precaution
C4.4 and C6.6 Engines General Information
D9R Track-Type Tractor Power Train Torque Converter - Remove - With Torque Divider
Failure Analysis Report - AFA Good Report {0374, 1000} Failure Analysis Report - AFA Good Report {0374, 1000}
D9R Track-Type Tractor Power Train Torque Converter - Install - With Torque Divider
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Operation
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Before Operation
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Indicators
Improved Scraper Bowl Side Spreader Joints on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201} Improved Scraper Bowl Side Spreader Joints on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201}
Procedure to Install Support Plates and Gussets to the Side of the Scraper Bowl on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201} Procedure to Install Support Plates and Gussets to the Side of the Scraper Bowl on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201}
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor User Interface
973K Track Type Loader Stopping the Engine if an Electrical Malfunction Occurs
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
973K Track Type Loader Capacities (Refill)
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Machine Preparation for Troubleshooting
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Calibrations (Cat ET)
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Steering) High Pressure Stall - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Time - Check
973K Track Type Loader Circuit Breakers and Fuses - Reset/Replace
D9R Track-Type Tractor Power Train Torque Converter - Disassemble - With Torque Divider
D9R Track-Type Tractor Power Train Torque Converter - Assemble - With Torque Divider
340F Excavator Machine Systems General Testing and Adjusting Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.