Stopping the Engine if an Electrical Malfunction Occurs
Perform the following procedure.
- Apply the parking brake.
- Lower all attachments to the ground.
Show/hide table
Illustration 1 g03782758 - Open the access door to the fuse panel below the right console inside the cab.
Show/hide table
Illustration 2 g06098719 Red border around the fuse for engine control - Remove the fuse for engine control (engine start key) to stop the engine, as shown.
Note: Do not operate the machine again until the malfunction has been corrected.
- Once the malfunction has been corrected, install the fuse back for engine control (engine start key) and close the access door.
Show/hide table
|
Engine Start Key - Remove the fuse in order to stop the engine. Install the fuse in order to allow the engine to be started. |
Caterpillar Information System:
C4.4 and C6.6 Engines Component Location
973K Track Type Loader Operator Controls
C4.4 and C6.6 Engines Welding Precaution
C4.4 and C6.6 Engines General Information
D9R Track-Type Tractor Power Train Torque Converter - Remove - With Torque Divider
Failure Analysis Report - AFA Good Report {0374, 1000} Failure Analysis Report - AFA Good Report {0374, 1000}
D9R Track-Type Tractor Power Train Torque Converter - Install - With Torque Divider
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Operation
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Before Operation
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D8T Track Type Tractor Indicators
Improved Scraper Bowl Side Spreader Joints on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201} Improved Scraper Bowl Side Spreader Joints on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201}
Procedure to Install Support Plates and Gussets to the Side of the Scraper Bowl on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201} Procedure to Install Support Plates and Gussets to the Side of the Scraper Bowl on Certain 623H and 623K Wheel Tractor-Scrapers {0635, 0679, 6201}
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
973K Track Type Loader Capacities (Refill)
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Machine Preparation for Troubleshooting
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Calibrations (Cat ET)
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Steering) High Pressure Stall - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Time - Check
973K Track Type Loader Circuit Breakers and Fuses - Reset/Replace
D9R Track-Type Tractor Power Train Torque Converter - Disassemble - With Torque Divider
D9R Track-Type Tractor Power Train Torque Converter - Assemble - With Torque Divider
340F Excavator Machine Systems General Testing and Adjusting Information
D5R and D6N Track-Type Tractor Power Train Track Roller Frame - Remove and Install