A New Rear Frame Is Now Used on the Heat Exchanger for Marine Engines {1379}
- Marine Engine:
- C30 MARINE (S/N: CLX1-UP)
- C32 MARINE (S/N: RXB1-UP)
Description of Change: A new rear frame for the heat exchanger on marine engines with an improved rugged design has been released.
Adaptable To: The new 294-2292 Frame is a direct replacement for the 205-9471 Frame . 294-2292 Frame became effective on the C30 (S/N: CLX2928) and on the C32 (S/N: RXB2839).
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
C175-16 Locomotive Engine Pressure Sensor
G3520C and G3520E Engines Pressure Sensor
C280-12 and C280–16 Marine Engines Camshaft - Install
C13 Engine Clean Gas Induction Valve - Assemble
G3600 Engines Engine Operation
C13 Engine Clean Gas Induction Valve - Disassemble
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Cylinder Liner - Remove
3512B Marine Auxiliary Engine Refill Capacities and Recommendations
C11 and C13 Engines and 14M and 16M Motor Graders Cat Data Link - Test
C9 Engines for Motor Graders Configuration Parameters
G3600 Engines Alternator - Inspect
G3600 Engines Belts - Inspect/Adjust/Replace
G3520C and G3520E Generator Set Engines Engine Speed/Timing Sensor
G3520C and G3520E Generator Set Engines General Information
G3520C and G3520E Generator Set Engines Welding Precaution
G3520C and G3520E Generator Set Engines Diagnostic Capabilities
G3600 Engines Programmable Parameters
G3520C and G3520E Generator Set Engines Configuration Parameters
G3600 Engines Symptom Troubleshooting
G3520C and G3520E Generator Set Engines Engine Cranks but Does Not Start
G3520C and G3520E Generator Set Engines Engine Does Not Crank
G3520C and G3520E Generator Set Engines Engine Misfires, Runs Rough or Is Unstable