Engine Harness
Show/hide table
图 1 | g03177524 |
典型示例 |
Show/hide table
285-3991 发动机导线总成 、 285-3993 发动机导线总成 、 263-6616 发动机导线总成 和 263-6618 发动机导线总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | -     | -     | 将 70 针接头拧紧至 6 ± 1 N·m (53 ± 9 lb in)。     |
Caterpillar Information System:
2006/08/01 New Pressure Sensors Are Now Available {1718, 1917, 1923, 1924}
C13 Engine Cylinder Head - Remove
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Precooler - Install
C13 Engine Precooler - Remove
G3520C and G3520E Generator Set Engines System Voltage Problem
C13 Engine Turbocharger - Install - Low Pressure
C13 Engine Turbocharger - Remove - Low Pressure
G3520C and G3520E Generator Set Engines Coolant Pressure Is High
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Door Latch
C13 Engine Turbocharger - Install - High Pressure
C13 Engine Turbocharger - Remove - High Pressure
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Monitoring System
C13 Engine Cylinder Head - Install
C13 Engine Coolant Temperature Sensor - Remove and Install
C13 Engine Inlet Manifold Temperature Sensor - Remove and Install
C13 Engine Inlet Air Temperature Sensor - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Personal Computer to UPS Connection
2006/10/16 Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
C13 Engine Engine Oil Filter Base and Oil Cooler - Install
C13 Engine Engine Oil Filter Base and Oil Cooler - Remove
C27 and C32 Generator Set Engines Fuel Priming Pump - Remove and Install
2006/08/01 Improved Support for the Precooler is Now Used {105P, 1380}
C27 and C32 Generator Set Engines Fuel Filter Base - Remove