Installation Procedure
Show/hide table
Table 1
Required Tools     |
Tool     |
Part Number     |
Part Description     |
Qty     |
A     |
4C-5597     |
Anti-Seize Compound     |
1     |
Show/hide table
|
NOTICE |
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
|
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
|
|
Illustration 1 | g01293092 |
- Install elbow (12) onto precooler (13) .
- Apply Tooling (A) to the threads of clamp (14). Connect clamp (14). Tighten clamp (14) to a torque of 12 ± 4 N·m (106 ± 35 lb in).
Show/hide table
|
|
|
Illustration 2 | g01293077 |
- Install precooler (12) .
- Apply Tooling (A) to the threads of clamp (10). Connect clamp (10). Tighten clamp (10) to a torque of 12 ± 4 N·m (106 ± 35 lb in).
- Install bolts (11) .
Show/hide table
|
|
|
Illustration 3 | g01293075 |
- Connect hose (9) .
Show/hide table
|
|
|
Illustration 4 | g01293068 |
- Connect hose (8). Connect hose (7) .
Show/hide table
|
|
|
Illustration 5 | g01293051 |
Show/hide table
|
|
|
Illustration 6 | g01293066 |
- Install valve (2). Install bolts (5) .
- Connect hose (6). Connect tube assemblies (4). Connect tube assembly (3). Connect harness assembly (1) .
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".